Harman International Industries Inc EON618S Manual Do Utilizador

7

GAIN

LIMIT

SIGNAL

SIGNAL

GAIN

MAIN

IN 1

MONITOR

SUB

MIC
LINE

IN 2

THRU

EQ

PRESETS

BOOT

SPEECH

SYNC

FRONT LED

POWER

ON

OFF

MIC

LINE

EON 615

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. 

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FUSE TYPE: T3.15L250V

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING.

430W Max

100-120VAC  50/60Hz    

230-240VAC  50/60Hz

MODEL : EON615

SERIAL NO:

JBL PROFESSIONAL

NORTHRIDGE, CA.  USA

A HARMAN INTERNATIONAL COMPANY

DESIGNED AND ENGINEERED IN THE USA

Made in

Mexico

1. 

Using the EQ Preset ( F ) button, select the 
appropriate preset to match your application ( Full-
Range Only ).

2. 

Set the gain level for the input using the Channel 
Gain ( H ) controls. A good starting point is to set 
the pot at 12 o’clock.

3. 

Slowly turn Master Volume ( L ) to the right until 
the desired volume is reached.

1. 

Confirm the Power Switch ( O ) is in the OFF position. 

2. 

Connect the supplied power cord to the power receptacle 
on the rear of the speaker. 

3. 

Connect the power cord to an available power outlet.

4. 

Flip on the Power Switch ( O ) and the Power LED ( A ) and 
the Power LED on the front of the speaker will illuminate.

1. 

Turn Channel Gain Controls ( H ) and Master 
Volume Control ( L ) all the way to the left before 
connecting any inputs

2. 

Connect XLR or TRS cable from audio source to 
CH1 or CH2 inputs ( M )

3. 

Select Mic or Line via the Mic/Line Button ( K; 
Full-Range Only )

QUICK SETUP GUIDE