Harris Corporation RF Communications Division RF-7800B-VU104 Manual Do Utilizador

Preventive maintenance is the systematic, daily care and inspection of equipment to prevent equipment failure and 
reduce downtime.

 contains the checks and services that should either be performed on a daily basis when the equipment is 

in use or on a weekly basis when the equipment is in a standby condition. 

 contains the checks and services 

that should be performed on a weekly basis.

To avoid impaired BGAN terminal performance, make sure 
the antenna is not damaged or the surface is not covered with 
foreign material like paint of labeling.

Shortcomings and defects which are revealed when the BGAN terminal is in service must be attended to by means 
of corrective maintenance. The type of work required determines if the corrective maintenance procedure can be 
performed by the operator, or if it must be performed at a maintenance facility.

1

Completeness

Check to see that the equipment is complete.

2

Exterior Surfaces

Remove dust, dirt, and moisture from all surfaces. Only use a soft 

damp cloth to clean the Broadband Global Area Network (BGAN) 

Terminal.

3

Operation

Verify connection to BGAN terminal web interface.

4

Installation

Check hardware for looseness. Make sure unit is secure.

5

RF-7800B-VU104 drain 

holes

There are four separate drain holes on the bottom of the RF-7800B-

VU104 that will allow condensation and moisture out of the 

antenna to prevent any corrosion. Turn the screws clockwise to 

Open and counterclockwise to Close.

1

Connectors

Check all connectors for debris, damage, or corrosion. Elevate to 

a higher level of maintenance, if required.

2

Antenna

Check for breaks or strains; repair or replace as required.

3

Cables

Check for cracks or cuts; repair or replace as required.