Top Victory Electronics Co Ltd PD4203G Manual Do Utilizador

2

Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.

 This equipment has been tested and found to comply with the limits residential installation. This equipment

generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1.  Reorient or relocate the receiving antenna.
2.  Increase the separation between the equipment and receiver.
3.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

y

  The product is packaged in a carton together with other standard accessories.    Any optional accessories shall

be packed separately in another carton.

y

  The weight of the Plasma Display is approx. 36 kg.    Due to the size & weight of the product, it is recommend

that it is moved by a minimum of 2 people.

y

  The protective glass and the glass substrate are installed on the front of the product.  Since both glasses can

be broken and scraped easily, move the product gently.    Never place the unit with the glass facing downwards
unless it is protected with pads.

y

  When opening the carton, check that the product is in good condition and that all standard accessories and

items are included.

y

  Whenever possible, use the handles on the back of the Display for transport.

y

  A specified technician from the distributor or authorised agent should always install the product, otherwise the

warranty may become void.

y

  The power consumption of this device is 320W ,always use the jack exclusively designed for this product.    If

an extended line is required, please consult with your service agent.

y

  The product should be installed on a flat surface to avoid tipping.   The distance between the back of the

product and the wall should be maintained for proper ventilation.

y

  Avoid installing the product in the kitchen, bathroom or any other places with higher humidity so as not to

shorten the service life of the electronic components.

y

  Please ensure the product be installed horizontally, any 90

° clockwise or counterclockwise installation may

induce poor ventilation and subsequent component damage.

y

 

To protect the screen and avoid screen burn, do not hold on a static picture for a long time.

y

  In order to receive the most consummate warranty, installation has to be done by the professional technician

from dealer or authorized distributor.

1.  The changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

2.  Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3.  If the PDP monitor displays a fixed pattern on the screen for extended periods of time, it could make the

differences of brightness and chromaticity between fixed pattern area and other areas. This is because the
brightness of fixed pattern area becomes lower than the other areas due to degrading of the phosphor, but this
phenomenon is not failure.