Nokia of America Corporation BBTRX-14 Manual Do Utilizador
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
Always observe the general ESD instructions for handling modules containing
semiconductor components.
semiconductor components.
Install SFP module(s) into the SFP ports on the rear of the 9763 MCI.
...................................................................................................................................................................................................
4
Attach the Ethernet cable(s) to the SFP module(s) at the rear of the 9763 MCI.
...................................................................................................................................................................................................
5
Check attachment of RF antenna cables:
If you are using...
Then...
the internal RF antennas
antenna cables should already be attached to
the RF antenna connectors on the rear of the
9763 MCI.
the RF antenna connectors on the rear of the
9763 MCI.
external RF antennas
detach the internal RF antenna 9763 MCI from
the connectors and attach the external RF
antenna cables.
the connectors and attach the external RF
antenna cables.
...................................................................................................................................................................................................
6
WARNING
Electric-shock hazard
The current to the unit must be limited by an external fuse or circuit breaker incorporated
in the fixed wiring. The fuse or circuit breaker can be used as a disconnect device to turn
off the power to the system.
in the fixed wiring. The fuse or circuit breaker can be used as a disconnect device to turn
off the power to the system.
Ensure that the system power is off and that power cables are safe to handle before you
proceed with this procedure.
proceed with this procedure.
WARNING
Electric-shock hazard
The power supply lines to the equipment are energized. Contact with parts carrying
current can cause serious injury, possibly including death, even hours after the event.
current can cause serious injury, possibly including death, even hours after the event.
Turn off and lock out the system power at the disconnect device before working on or
servicing the equipment.
servicing the equipment.
9763 MCI installation
9763 MCI installation
9763 MCI installation
Procedure 3-1: Mount the 9763 MCI onto a wall
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-12
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9763 MCI
3MN-MCI-IMOP
Issue 1
December 2013