Alcatel-Lucent USA Inc. ONEBTS-18 External Photos

APPLICANT:  Alcatel-Lucent                   Exhibit 4                                     FCC ID:  AS5ONEBTS-18 

 

 
Section 2.1033 (c)(12): 
 
Photographs of the equipment of sufficient clarity to reveal equipment construction and layout, including 
meters, if any, and labels for controls and meters and sufficient views of the internal construction to define 
component placement and chassis assembly. 
 
The  UMTS 9341 RRH 40W 1900 MHz System, subject of this certification, is comprised of two separate 
modules interconnected by fiber optic cable: 1) the digital Base Band Unit (BBU), and 2) the RF Remote 
Radio Head (RRH).  They have the flexibility of being installed either in close proximity to or remotely 
located from each other. The BBU has the capability of controlling up to 3 remotely located RRH units, via 
fiber optic cable, and incorporates the digital channel cards, reference oscillator module, T1/E1 and alarm 
interface, and the RF-to-Optical and Optical-to-RF conversion circuitry.  The 1900 MHz RRH incorporates 
the Future Technology Radio (FTR1900), power amplifier (PA) and passive filter with single transmit (Tx) 
and diversity receive functionality (Rx0, Rx1). 
 
Photographs of the system equipment assembly and configuration and of the individual BBU and RRH 
components are shown in this exhibit. 
 
View Number 1:  
 
The RRH and BBU interconnected by fiber optic cable as a system.  The RRH is floor mounted on a 
stand typical of  test laboratory installation.  The BBU is an outdoor model.  This is the EMC test lab 
setup and configuration for conducted emissions measurement.