E F Johnson Company 2425M70 Manual Do Utilizador

5-11

Priority and Radio Wide Scan lists can be programmed.

A scan list is simply the channels that are scanned when scanning is enabled. With all 
operating modes, as many priority scan lists as are required can usually be programmed 
(up to 255). The only limitation is the available memory. Each list can include up to 256 
channels/talkgroups. More information follows on selecting and editing priority scan lists.

Channels in the conventional priority scan lists are determined as follows. Channels in the 
SMARTNET/SmartZone/P25 Trunked priority scan lists are indicated only when editing a 
list (see “Editing a Priority Scan List”).

1 Enable Priority scanning as described in Section 5.12.1. Also select the scan list if 

applicable as described in the following “Selecting a Priority Scan List” description. 

2 Select the desired zone and then scroll through the channels by rotating the Select 

switch. When the displayed channel is in the scan list (scanned normally), the   
symbol is displayed next to the zone number as shown in the following illustration. 

Conventional Operation - The scan list is user selectable by the SCAN option switch. 
Refer to Section 6.10.1 for more information.

SMARTNET/SmartZone/P25 Trunked Operation - The scan list can be temporarily 
changed if the Scan (List) Select option switch is programmed or by pressing/holding the 
scan button. Refer to Section 7.11.2 for more information.

Both of the above operations are also menu selectable.

Scan List Indicator

Channe

Number