Vernier Software & Technology LQ2-LE Manual Do Utilizador
LabQuest Hardware
7
To enable internal sensors within LabQuest App, tap Sensors, and choose Sensor Setup. Within
the Sensor Setup dialog box, tap a checkbox to enable the associated sensor. Then tap OK to
return to the LabQuest App Meter screen.
the Sensor Setup dialog box, tap a checkbox to enable the associated sensor. Then tap OK to
return to the LabQuest App Meter screen.
GPS
– The internal GPS collects latitude, longitude, and altitude readings, and may be
used with other sensors. You can choose units of decimal degrees, degree minutes, or
UTM. Note: It may take up to 15 minutes to acquire an initial signal outdoors. We do not
recommend using the GPS indoors.
UTM. Note: It may take up to 15 minutes to acquire an initial signal outdoors. We do not
recommend using the GPS indoors.
Microphone
– The internal Microphone is located on the top surface of LabQuest and
measures waveforms. Note: This sensor cannot be used with external sensors.
Accelerometers
– The Accelerometers measure accelerations up to
2 g in the x-, y- and
z-axis directions.
Light Sensor
– The internal Light Sensor is located on the top surface of LabQuest. This
is an uncalibrated sensor which measures visible light intensity.
Temperature
– The internal Temperature Sensor monitors ambient temperature.