LIFEtool Solutions GmbH IMP Manual Do Utilizador
22
8.3
IntegraMouse Plus energy saving mode
In order to save power during battery operation, the IntegraMouse Plus has an in-built
energy-saving mode. This begins automatically, when:
energy-saving mode. This begins automatically, when:
• the device is not used for 30 seconds.
• the computer to which the IntegraMouse Plus is connected goes into standby mode.
Energy-saving mode ends automatically, when:
• the user moves the mouthpiece or quickly presses the ON/OFF button (do not hold
down).
• a power-supplying USB cable is plugged in.
• the computer to which the IntegraMouse Plus is connected wakes up from standby
mode again.
Energy-saving mode is basically not noticeable to the user, because the
IntegraMouse Plus activates again immediately on interaction. (Attention: only
with movement of the mouthpiece, but not by sipping or puffing!
IntegraMouse Plus activates again immediately on interaction. (Attention: only
with movement of the mouthpiece, but not by sipping or puffing!
Energy saving mode also uses battery power. When you no longer need the
IntegraMouse Plus or will not use it for a longer time, switch it completely off.
IntegraMouse Plus or will not use it for a longer time, switch it completely off.
8.4
Switching off the IntegraMouse Plus
The IntegraMouse Plus can only be switched off in active mode (LEDs for the battery power
display light up). If the IntegraMouse Plus is in energy-saving mode, this can be quitted by a
short press of the ON/OFF key.
By pressing the ON/OFF key for at least 3 seconds the IntegraMouse Plus can be switched
off. All LEDs on the IntegraMouse Plus go out.
display light up). If the IntegraMouse Plus is in energy-saving mode, this can be quitted by a
short press of the ON/OFF key.
By pressing the ON/OFF key for at least 3 seconds the IntegraMouse Plus can be switched
off. All LEDs on the IntegraMouse Plus go out.
When battery power is low, the IntegraMouse Plus switches itself off
automatically. When it is switched off, no more energy is needed from the
battery.
automatically. When it is switched off, no more energy is needed from the
battery.
8.5
Wake on USB
The "Wake on USB" function permits the inactive computer to activate the connected
IntegraMouse Plus on the USB port. This function must be supported by the hardware and by
the operating system. Further information can be found in the instructions for your computer
and in its operating system.
IntegraMouse Plus on the USB port. This function must be supported by the hardware and by
the operating system. Further information can be found in the instructions for your computer
and in its operating system.
"Wake on USB" with the IntegraMouse Plus only works via the connected USB
cable (not in wireless mode) and only on the USB ports of the computer that are
directly on the mainboard.
cable (not in wireless mode) and only on the USB ports of the computer that are
directly on the mainboard.