Advanced Sterilization Products 100NXRFID Internal Photos
33 Technology Drive ● Irvine, CA ● 92618 ● [Phone] 800.595.0200 ● [Fax] 949.581.5997
STERRAD® 100NX® RFID CONFIGURATION
The RFID Transceiver Assembly resides on the interface board within the metal control enclosure
assembly.
assembly.
The RFID Transceiver Assembly interfaces with the RFID antenna board through a coaxial cable. The
antenna board is mounted on the delivery system. Peroxide cassettes with an RFID tag are inserted into
the delivery system and the system reads and writes to this tag.
antenna board is mounted on the delivery system. Peroxide cassettes with an RFID tag are inserted into
the delivery system and the system reads and writes to this tag.
Control Enclosure Assembly
RFID Antenna Board
RFID Module
(within metal enclosure)
(within metal enclosure)
Peroxide Cassettes with RFID tag
Inserted here
Inserted here
Coax attached here
Coax routed to antenna board