Futaba Corporation FMT-03-24G Manual Do Utilizador

S1

● Select the function name 

and return to the Linkage 

menu by pushing the RTN 

button  or  pushing  the 

Home/Exit button.

<Edit dial>

The altitude, variometer, position screen displays 

and sets the data from an SBS-01G (GPS sensor) 

sold separately.

*The GPS sensor is necessary, and is sold separately. Mount 

and connect the sensor in accordance with the sensor 

instruction manual. 

*Only receiver voltage can be used in FASSTest 12CH mode.
*The FASSTest 18CH mode can use all the telemetry 

functions.

*A GPS sensor must be installed in the aircraft.

● Push S1 button to advance to next page.

●This indicates the receiving accuracy from a GPS 

Satellite. When three bars are displayed, the GPS is 

ready for use.

● Select [GPS] in the TELEMETRY screen and access the 

setup screen shown below by pushing the RTN button.

●  Refer  to  the  former 

p a g e   f o r   a   s e t u p 

about  ALTITUDE  and 

VARIOMETER. 

● Push S1 button to advance to next page.

● The position of the present model is displayed.

Scrolling

● Moving cursor

● Push the S1 button 

to call next page.