VeriFone 1619-20XPL Manual Do Utilizador
CONFIDENTIAL
Version A
Page 37 of 37
MasterCard® PayPass™ Contactless Transit Pilots
Installation Guide
Appendix A
MONITOR Functions
If the application is running perform a function 20 followed by a function 19 to drop into the
MONITOR program.
MONITOR program.
Effectively the User Interface of the terminal firmware, the Monitor program provides several
useful functions, as follows. In MONITOR mode the terminal display will read SECURAPP
MONITOR and show the date and time.
useful functions, as follows. In MONITOR mode the terminal display will read SECURAPP
MONITOR and show the date and time.
To scroll through the various MONITOR functions, press the ‘1’ key. When the option you
wish to select is shown, press the ENT key to select the desired (displayed) function.
wish to select is shown, press the ENT key to select the desired (displayed) function.
The functions are:
LOCAL LOAD
Allows software and/or configuration and data files to be transferred between the
Secura and an attached PC. This function is used when loading the application, as
outlined above
Secura and an attached PC. This function is used when loading the application, as
outlined above
RESET MASTER
This allows any application or data files held in the terminal memory to be cleared.
Often useful to do this before completely loading an application. A password will be
prompted for. This is 79318624.
Often useful to do this before completely loading an application. A password will be
prompted for. This is 79318624.
CHANGE DATE
Self explanatory
CHANGE TIME
Self explanatory
LOAD PROGRAM
Allows control to be passed to a loaded application. The list of available application
modules will be shown. To scroll through them, press ‘1’. The MasterCard application
is invoked by selecting the DIRECTOR program.
modules will be shown. To scroll through them, press ‘1’. The MasterCard application
is invoked by selecting the DIRECTOR program.
CHANGE SPEED
Allows the comms speed for the Secura to PC link to be changed
Appendix B
FCC Statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)
conditions:
(1)
this
device
may
not
cause
harmful
interference,
and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
undesired operation.
-- End of document –