Authinx Inc. KR31A Manual Do Utilizador
Initializing Keychain Remotes
Press and hold the ARM button on the Keychain remote for a second
and then release it. This initializes the remote and picks a random
code that is used when it is registered with the Console.
and then release it. This initializes the remote and picks a random
code that is used when it is registered with the Console.
ENTER PIN
12:00 am
12:00 am
****
12:00 am
12:00 am
1. INSTALL
ZONE
ZONE
This takes you to the first level of the menu at step 1. This is the INSTALLATION
level. The display looks like this:
level. The display looks like this:
Now simply press any button on the Keychain remote. The Console will acknowl-
edge that it has been registered by displaying RMOT 1 SET, RMOT 2 SET, etc. as
you install more remotes.
edge that it has been registered by displaying RMOT 1 SET, RMOT 2 SET, etc. as
you install more remotes.
Repeat this for any other Keychain remotes you want to register.
Press Clear to back out of the menu. You are asked to confirm, 1. YES, 2 NO.
Pressing 1 takes you back to the HOME CONTROL screen. Pressing 2 take you up
one level of menu.
Pressing 1 takes you back to the HOME CONTROL screen. Pressing 2 take you up
one level of menu.
Registering the Keychain remote with the Console.
Press either of the Console’s 2 Menu up/down buttons (to the right of the display).
The display then shows ENTER PIN (Personal Identification Number) in the top
line. Entering the PIN clears the top line and shows * for each number entered. The
default PIN is 0000, you’ll find out later how you can change this, but for now press
0000 on the keyboard under the Console’s flip up lid.
The display then shows ENTER PIN (Personal Identification Number) in the top
line. Entering the PIN clears the top line and shows * for each number entered. The
default PIN is 0000, you’ll find out later how you can change this, but for now press
0000 on the keyboard under the Console’s flip up lid.
Arming the system
Press ARM HOME on the Console to arm all Door/Window Sensors instantly. This
does not affect Motion Detectors.
does not affect Motion Detectors.
Pressing ARM on the Keychain remote always arms in the AWAY mode.
Press ARM on the Keychain remote to arm all Door/Window Sensors and Motion
Detectors. This arms the system after a set delay. The delay will be what you
specified as the EXIT DELAY (1 minute default). If you arm the system in the
AWAY mode you will also have a delay when you enter your home before the alarm
trips, to give you time to disarm it. This delay will be what you specified for your
ENTRY DELAY (30 second default).
Detectors. This arms the system after a set delay. The delay will be what you
specified as the EXIT DELAY (1 minute default). If you arm the system in the
AWAY mode you will also have a delay when you enter your home before the alarm
trips, to give you time to disarm it. This delay will be what you specified for your
ENTRY DELAY (30 second default).
Disarming the system
Pressing DISARM on the Keychain remote disarms the system instantly.
To disarm from the Console: Press either of the 2 Menu up/down buttons (to the
right of the display). The display then shows ENTER PIN (Personal Identification
Number) in the top line.
right of the display). The display then shows ENTER PIN (Personal Identification
Number) in the top line.
ENTER PIN
12:00 am
12:00 am
****
12:00 am
12:00 am
DISARMED
Entering the PIN clears the top line and shows * for each number entered. Enter
your 4 digit PIN.
your 4 digit PIN.
If the unit is armed, (in either ARMED HOME or ARMED AWAY modes) it will
disarm when the PIN is entered, and return to the time display, with DISARMED in
the top line.
disarm when the PIN is entered, and return to the time display, with DISARMED in
the top line.