Authinx Inc. UR47A Manual Do Utilizador
Set Up and Operating Instructions for Remote Control Model UR47A
To setup for A/V functions:
Press and hold SETUP until the red lights stays on. Press and release TV, VCR, CBL, AUX, SAT or
DVD. Enter the three digit code for your TV, VCR, etc., from the code list.
DVD. Enter the three digit code for your TV, VCR, etc., from the code list.
Home Control operation:
Plug in an X10 Transceiver (sold separately) and set it to Housecode A. You can control it and other
X10 modules (set to Housecode A) as follows:
Press and release any of the 4 ON-OFF rocker buttons at the bottom corresponding to the X10
Module you want to control. Set the slide switch on the side of the remote to control Modules set to
Unit Codes 1-4 OR 5-8.
X10 modules (set to Housecode A) as follows:
Press and release any of the 4 ON-OFF rocker buttons at the bottom corresponding to the X10
Module you want to control. Set the slide switch on the side of the remote to control Modules set to
Unit Codes 1-4 OR 5-8.
To change the X10 Housecode:
The UR47A Remote defaults to Housecode A, to change this:
1. Press and hold SETUP until the red light stays on.
2. Press and release the number button corresponding to the Housecode you want:
1. Press and hold SETUP until the red light stays on.
2. Press and release the number button corresponding to the Housecode you want:
(01=A, 02=B, 03=C .....16=P).
Note: The Housecode you choose must match the Housecode on the Transceiver and X10 Modules
you are using it with.
you are using it with.
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if not installed and used properly, that
is, in strict accordance with the manufacturers instructions, may cause interference to radio and television
reception. It has been type tested and found to comply with the limits for remote control security devices
in accordance with the specifications in Sub-Part B of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference in a residential installation. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by unplugging the equipment, try
to correct the interference by one or more of the following measures.
o Reorient the antenna of the radio/TV experiencing the interference.
o Relocate the product with respect to the radio/TV.
o Move the product away from the radio/TV.
o Plug the product into an outlet on a different electrical circuit from the radio/TV experiencing the
is, in strict accordance with the manufacturers instructions, may cause interference to radio and television
reception. It has been type tested and found to comply with the limits for remote control security devices
in accordance with the specifications in Sub-Part B of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference in a residential installation. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by unplugging the equipment, try
to correct the interference by one or more of the following measures.
o Reorient the antenna of the radio/TV experiencing the interference.
o Relocate the product with respect to the radio/TV.
o Move the product away from the radio/TV.
o Plug the product into an outlet on a different electrical circuit from the radio/TV experiencing the
interference. If necessary, consult your local dealer for additional suggestions.
NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY
CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
X10 (USA) Inc., 91 Ruckman Rd., Closter, NJ 07624. www.x10.com
UR47A-6/30/99