Authinx Inc. XC14A Manual Do Utilizador
1. Refer to the setup and operating instructions that came
with the 2.4 GHz Video Receiver, Model VR31A (sold
separately) to set up the Receiver.
separately) to set up the Receiver.
2. Mount the camera in a suitable location with the antenna
on top so the camera is the right way up. If you install
it outdoors, run the small cable adapter through a hole
in the wall so you can plug the power supply into an
AC outlet indoors.
it outdoors, run the small cable adapter through a hole
in the wall so you can plug the power supply into an
AC outlet indoors.
3. Plug the camera’s power jack into the adapter cable
on the power supply.
4. Set the Housecode and Unit Code. (See instructions
included with X10 remote controls).
5. Plug power supply into any 120V AC outlet.
6. Set the channel switch on the camera to the same setting
6. Set the channel switch on the camera to the same setting
as the one on the VR31A Video Receiver.
7. Adjust the antenna on the camera if necessary to aim
it in the direction of the VR31A Receiver that you have
connected to your TV or monitor.
connected to your TV or monitor.
8. Adjust angle of motion detector for best coverage.
X10 Wireless Technology, Inc., Limited One Year Warranty
X10 Wireless Technology, Inc. (X10) warrants X10 products to be
free from defective material and workmanship for a period of one (1)
year from the original date of purchase at retail. X10 agrees to repair
or replace, at it’s sole discretion, a defective X10 product if returned
to X10 within the warranty period and with proof of purchase. If
service is required under this warranty:
1. Call 1-800-675-3044 or e-mail sales@x10.com for details on
X10 Wireless Technology, Inc. (X10) warrants X10 products to be
free from defective material and workmanship for a period of one (1)
year from the original date of purchase at retail. X10 agrees to repair
or replace, at it’s sole discretion, a defective X10 product if returned
to X10 within the warranty period and with proof of purchase. If
service is required under this warranty:
1. Call 1-800-675-3044 or e-mail sales@x10.com for details on
how to return your unit(s).
2. Enclose a check for $4.00 to cover postage and handling.
3. Enclose a dated proof of purchase.
4. X10 is not responsible for shipping damage.
3. Enclose a dated proof of purchase.
4. X10 is not responsible for shipping damage.
Units to be returned should be packed carefully.
Please visit www.x10.com/warranty
to complete your on-line warranty registration.
to complete your on-line warranty registration.
1-800-675-3044 sales@x10.com
● Built-in motion detector.
● Built-in 2.4 GHz Video Sender.
● Powered from a plug-in power supply (included).
● Use it outdoors to monitor your front door, back yard, etc.
● Use it indoors to monitor a child’s bedroom, etc.
● Powered from a plug-in power supply (included).
● Use it outdoors to monitor your front door, back yard, etc.
● Use it indoors to monitor a child’s bedroom, etc.
Model XX14A
XC14A-02/01
The XX14A includes the XC14A camera and XM13A power supply. The XC14A is a very small and compact color
video camera with built-in 2.4 GHz Video Sender. You can attach it to a wall anywhere you want to monitor. The
XC14A transmits video and sound to the VR31A 2.4 GHz receiver (sold separately) which is connected to your TV
located anywhere in your home (up to 100 ft. away). The built-in motion detector turns the camera on only when
there is motion, to conserve power. The motion detector also sends a wireless signal to an X10 transceiver which can
then turn on an X10 remote chime, etc.
video camera with built-in 2.4 GHz Video Sender. You can attach it to a wall anywhere you want to monitor. The
XC14A transmits video and sound to the VR31A 2.4 GHz receiver (sold separately) which is connected to your TV
located anywhere in your home (up to 100 ft. away). The built-in motion detector turns the camera on only when
there is motion, to conserve power. The motion detector also sends a wireless signal to an X10 transceiver which can
then turn on an X10 remote chime, etc.
XCam III
Motion Controlled Indoor/Outdoor Color Camera
Adjust antenna.
XC14A
™
(with built-in 2.4 GHz transmitter)
2
5
Plug into
any AC
outlet
any AC
outlet
Attach the
to a wall.
to a wall.
6
3
7
Set channel switch to
match setting on the
VR31A Receiver.
match setting on the
VR31A Receiver.
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NO
CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NO
CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
Outdoors
Indoors
8
Set the code used to
turn on an off from
X10 remote controls.
turn on an off from
X10 remote controls.
4
XM13A