Bosch Security Systems Inc. B120 Manual Do Utilizador

 
 
REV-WT Users Manual  

Page 2 

 
Quick set cont’d. 
 
4. If the Group and Channel match the desired receiver group and channel,     
    proceed to Step 9. If not, proceed to Step 5. 
 
5. To select a different GP/CH, press SET one time. The Group will start 
    flashing. Use the up and down arrows to change the group number. Press 
    the SET button to save the Group.  
 
    After setting the Group, The Channel number will start flashing. Use the   
    up/down arrows to change the Channel number. Press SET and the  
    channel is now saved. 
 
6. There are 18 preferred Groups and up to 16 Channels available in   
    stored memory. If desired, you can create new groups/ channels but  
    you must change to a new frequency to store in that group/channel. 
 
    In order to select a new frequency, you must have a “users” group       
     /channel selected. Press the SET button. The Group should be flashing. 
    Press the Up arrow until group 19u is found (any u group can  
    be used) Press SET. The Channel should now be flashing. Select a  
    channel with the up/down arrow. Press SET. 
 
    You are now ready to select a frequency to store in the users group  
    above. Press the Menu button one time. A “dashed” line may appear on  
    the display (if this is the first user program) or a previously stored  
    frequency will be displayed. Press the Set button one time. The line  
    or frequency should start flashing. 
  
    Press the Set button one time then use the Up/Down arrow buttons to  
    select the desired frequency. Press Set when complete. The selected  
    frequency should be displayed and not be flashing.