Nihon Kohden Corporation ZM-541PAA Manual Do Utilizador

12

Do not allow the conductive part of the connector 
which is connected to the patient to contact other 
conductive parts including earth. This causes 
leakage current and incorrect measurement value 
and leads to wrong diagnosis.

After admitting a patient on the central monitor and 
attaching electrodes and sensors on the patient 
and connecting cables to the transmitter, check 
that there is no error messages and that the 
waveforms and numeric data are appropriately 
displayed on the transmitter and central monitor 
screen. If there is an error message, or waveform 
or numeric data is not appropriate, check the 
electrodes and sensors attachment, patient 
condition and settings on the transmitter and 
remove the cause.

Only use Nihon Kohden specified electrodes, 
electrode leads, SpO

2

 probes, and NIBP cuffs. 

Otherwise, the maximum performance from the 
transmitter cannot be guaranteed.

Do not reuse disposable parts and accessories.

For handling and precautions on electrodes, 
electrode leads, SpO

2

 probes and NIBP cuffs, refer 

to the manual.