HP 6000WLAN Manual Do Utilizador
Troubleshooting and Maintenance
Configuring the Computer
Configuring the Computer
124
Reference GuideStartup Guide
System Devices Menu
Setting
Description
Default
PS/2 Pointing Devices
Disables the internal pointing devices when an external PS/2
mouse is connected.
mouse is connected.
Auto
External Fn Key
Sets whether left CTRL+left ALT on an external keyboard is
interpreted as the Fn key.
interpreted as the Fn key.
Enabled
FDD Controller
Enables the floppy drive.
Enabled
Legacy USB Support
Enables BIOS support for USB mouse, keyboard, and floppy
disk drive.
disk drive.
Enabled
Internal LAN
Enables the internal (wired) LAN.
Enabled
Mini PCI Slot 1
Enables the PCI slot normally used for a modem, which is
located under the door on the bottom of unit. (Does not affect
Ambit modem.)
located under the door on the bottom of unit. (Does not affect
Ambit modem.)
Enabled
Mini PCI Slot 2
Enables the PCI slot normally used for a wireless LAN.
Enabled
Serial port
Enables the serial port.
Enabled
Base I/O address
Sets the I/O address and interrupt.
3F8h, IRQ4
Infrared port
Enables the infrared port.
Disabled
Mode
Sets the hardware to support FIR (Fast IR) or SIR (Standard
IR) infrared communications.
IR) infrared communications.
FIR
Base I/O address
Sets the I/O address and interrupt.
2F8h, IRQ3
DMA channel
Sets the DMA channel for Fast IR (FIR) mode.
DMA0
Parallel Port
Enables the parallel port.
Enabled
Mode
Sets the port to output only, bi-directional, EPP, or ECP.
ECP
Base I/O and
Interrupt
Interrupt
Sets the I/O address and interrupt.
378h/IRQ7
DMA channel
Sets the DMA channel for ECP mode.
DMA3