HP 6000WLAN Manual Do Utilizador

Add-On Devices
Connecting External Devices

86

Reference GuideStartup Guide

With a display attached, you can use the BIOS Setup utility to change certain display
behaviors, such as stretching the image to fill the screen at lower resolutions. See “To run
the BIOS Setup utility” on page 122.

For a display connected to a video adapter in a docking system, the docking display is
automatically selected when it is detected. To change this behavior, change the Primary
Video Adapter setting in BIOS Setup.

To use a TV set as a monitor

You can connect a television set or other video device to your computer to use as a
display. The computer’s built-in display remains active when you connect a TV set.

You can connect a TV set using a standard S-video cable, or an HP F1459A composite-
video adapter with a standard RCA-type video cable.

1.  Connect a video cable from the TV set to the expansion base’s S-video port. (You

don’t need to turn the computer off to do this.)

2.  Connect the TV set to a power source and turn it on.

•

  Restart the computer: click Start, Shut Down, Restart.

–or–

1.  Click Start, Settings, Control Panel, then double-click Display.

2.  On the Settings tab, click Advanced.

3.  On the Displays tab, activate the TV output.

Pressing Fn+F5 does not affect S-video output.

•

  Open Display in Control Panel, click the Settings tab, then click Advanced and make

the TV a “primary” display.

•

  Optional: Connect an audio cable from the computer’s audio out jack to the TV audio

input.