HP MRLBB1401 Manual Do Utilizador
HP PS110 Wireless VPN Router Quickstart
This Quickstart shows you how to install and get started using the HP PS110 802.11n Wireless VPN Router, hereafter referred to as the PS110. (See Products list
on page 6 for part numbers.)
on page 6 for part numbers.)
The latest documentation, including the HP PS110 Wireless Router Configuration/Administration Guide, is available at www.hp.com/support/manuals.
The PS110 router is an all-in-one networking device designed specifically to work with the HP ProLiant MicroServer Gen 8 Server. It incorporates an IPv6 capable
router, gigabit LAN switch, 802.11n wireless access point, SPI firewall, and VPN encryption technology. The PS110 provides a single radio dual band 802.11n
access point and aggregate VPN capacity of 30 Mbps. The Device enclosure is designed to specifically stack on top of the MicroSever Gen 8 and has built-in
technology to automatically detect any HP ProLiant Server in your network. In addition to auto-detection of HP ProLiant Servers, the device interface shows real-
time health status of the discovered servers via the iLO interface found on the servers.
router, gigabit LAN switch, 802.11n wireless access point, SPI firewall, and VPN encryption technology. The PS110 provides a single radio dual band 802.11n
access point and aggregate VPN capacity of 30 Mbps. The Device enclosure is designed to specifically stack on top of the MicroSever Gen 8 and has built-in
technology to automatically detect any HP ProLiant Server in your network. In addition to auto-detection of HP ProLiant Servers, the device interface shows real-
time health status of the discovered servers via the iLO interface found on the servers.
Hardware overview
Package contents
The PS110 router, two mounting screws with wall anchors, four rubber feet, AC/
DC power adapter, power cord, and documentation.
DC power adapter, power cord, and documentation.
Ports
• Four LAN Ethernet ports: Auto-sensing 10/100/1000 BaseT Ethernet ports
with RJ-45 connectors.
• One WAN Ethernet port: Auto-sensing 10/100/1000 BaseT Ethernet port
with RJ-45 connector.
• USB port: A standard USB 2.0 port that can be connected to an external
USB storage device. For details, see the USB port description in the
HP PS110 Wireless Router Configuration/Administration Guide.
HP PS110 Wireless Router Configuration/Administration Guide.
8
1
2
4
5
6
7
9
10
3
11
Rear view
1: Power jack
5: WAN port
2: Power On/Off button
6: Reset button
3: Wi-Fi On/Off button
7: WPS button
4: LAN ports 1–4
Front view
8: System and port status LEDs
9: USB port LED
10: USB 2.0 port
11: Power LED
The HP PS110 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED
802.11a/b/g/n product. The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.
802.11a/b/g/n product. The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.