Cobra Electronics Corporation XRS9730 Manual Do Utilizador

Comes Close to a Cobra

®

Pop Alert will alert you of Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect off.

The new Ku Band may be introduced to North America in the future. To prevent
false alerts until it is, the factory default for Ku Band detection is off. In parts of
North America, annoying false alerts from door openers and similar devices
are triggered on the X Band. If desired, X Band can be turned off. The factory
default for X Band detection is on.

In Program mode, 
go to Pop Detect. 

Two beeps

One beep

Pop On

Pop Off

NOTE
If you do not press the Set/City button within two minutes after beginning 
the set compass process, compass calibration will automatically terminate.

In Program mode, go to 
Set Compass. 

None

None

Press and release the Set/City button 
to begin setting the compass.

One (1) beep

Within two minutes, drive your 
vehicle in a circle twice, then press 
the Set/City button again.

Three beeps

Compass Set! 
For two
seconds
followed by
direction of
travel (N, NE,
E, SE, S, SW,
W or NW)

Press and release either the Select/Dim
button to proceed to the next user
mode or the Program/Mute button 
to exit Program mode.

None

None

None

Set Compa...

Drive in...

Compass

Press SET...

Set!

N W      h

One beep

Compass n...

Please tr...

In Program mode, 
go to X or Ku band. 

One beep

Two beeps

One beep

Two beeps

X-Band Off

X-Band On

Ku-Band Off

Ku-Band On