GN Audio USA Inc. OTE950 Manual Do Utilizador

TM

TM

To get the best performance from our noise-canceling technology, position the microphone near 

the corner of your mouth. Positioning is important; small adjustments in microphone placement 

can improve performance.
1) Place the headset on your head.
2)  Position the speaker directly on your ear. You can slide the 

headband in or out of the side support for proper fit.

3)  Position the microphone about one finger’s width away from your 

face at the corner of your mouth.

4)  The headband can be adjusted by 

gently flexing it outward to 

loosen or inward to tighten.

Connect charger cord to the headset’s charging port. The headset LED will glow red when 

charging and blue when fully charged.    

Turn Headset On: Hold down the MFB for approximately 2-3 seconds, until you hear a voice 

prompt, “Power On.” The blue light will quickly flash three times as the headset turns on.
Turn Headset Off: Hold down the MFB for approximately 3-4 seconds, until you hear a voice 

prompt, “Power Off.” A red light will flash 4 times and the headset will turn off.

1) Make sure that NFC is enabled on your cell phone.
2)  Place the NFC zone of your cell phone against the NFC zone  

of the headset and hold together until your cell phone registers 

the headset.

3) Follow the prompts on your cell phone to complete pairing.
Note: NFC and One-Touch Pairing are dependent on your cell 

Place Headset into Pairing Mode: The headset will go into pairing mode automatically the first 

time you power it on, or until it is paired with another device. To pair with another device after 

initial pairing, you will need to put it into pairing mode manually:
1)  With the headset powered off, press and hold the MFB. You will hear the voice prompt  

“Power On”. 

Keep holding the MFB for approximately 10 seconds, until you hear “Pair mode”. 

Indicator lights will alternately flash between red and blue. 

2) The headset will be visible for pairing to devices for 120 seconds.

Pairing to a Cell Phone:

1) Make sure that other Bluetooth devices are turned off or out of range.
2) Place the headset into pairing mode.
3) Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions.
4) Select “BlueParrott B550-XT” to pair. (Passcode is “0000” if needed.) 
5) When connected, the headset will give you the voice prompt, “Your headset is connected”.

As provided from the factory, the Parrott Button provides an easy way to mute the headset when 

on a call and to activate voice commands. You can also configure the button for other functions, 

such as a phone number speed dial, or to launch a particular application on your phone. 
To change the Parrott Button function, download the BlueParrott app for your 

cell phone (Android or iOS) or BlueParrott Updater for your computer. Scan the 

QR code to download the app or refer to 

blueparrott.com/parrott for more 

information. 

The B550-XT recognizes voice commands. You can say “Answer” to answer an incoming call, or 

“Ignore” to reject an incoming call.
When not on a call, voice commands are initiated by speaking the command “Hello Blue Parrot” 

while the headset is worn.
For a list of commands available, say “What can I say?” 
For more information on voice commands, please refer to the complete user guide, available 

online. 

Function

Button/Duration  

of Press 

LED Indicator

Audio Indicator 

Voice Indicator  

Power On 

MFB (2-3 seconds) 

3 fast blue flashes Short tone

“Power on”

Power Off

MFB (3-4 seconds)

4 fast red flashes

NONE

“Power off”

Enable Pairing 

Mode

MFB (5-15 seconds) Red and blue, 

alternating

NONE

“Pair mode”

Volume Up 

Volume  

Up (quick press)

NONE

Single tone 

NONE

Volume Down 

Volume Down  

(quick press)

NONE

Single tone 

NONE

Mute (On/Off) 

Parrott Button  

(quick press) or

Volume Up (2 seconds) 

NONE

Single tone, reminder 

tone every 10 seconds 

NONE

Answer a Call

MFB (quick press)  

or say “Answer”

Blue flash, once 

per second

Two rising tones 

NONE

End a Call 

MFB (quick press) 

or say “Blue Parrott 

end call”

Blue flash, every 4 

seconds 

Two falling tones 

NONE

Reject a Call

MFB (1-2 seconds)  

or say “Ignore”

NONE

Two falling tones

NONE

Transfer Audio 

Volume Down  

(1-2 seconds)

NONE

Long, low tone

NONE

Initiate Voice 

Commands (when 

in standby mode)

Place headset on 

and say “Hello Blue 

Parrott”

NONE

Short tone

“Please say a  

command”

Low Battery

N/A

Red flash

NONE

“Battery low”

Multiple Device Pairing and Advanced Features   
The BlueParrott B550-XT can pair with up to eight (8) devices. However, only two (2) devices 

may be connected to the headset at one time (multi-point). For more information on advanced 

features, please refer to the complete user guide, available online. 
For the full user guide, technical notes, and available accessories, go to 

blueparrott.com/B550-XT.

1.  B550-XT™ Headset 

2.  Spare Foam Ear Cushion

3.  Spare Microphone Windscreen

4.  USB Charging Cable 

5.  Auto Adapter

6.  Quick-Start Guide

7.  Warranty and Compliance Insert

A.  Flexible Microphone Boom 

(white dot indicates “talk” side)

B.  Volume Down

C.  Volume Up/Mute

D.  Multifunction Button (MFB)

E.  Indicator Lights

F.  Parrott Button

™

E

A

D

B

F

C

NFC Zone

NFC Zone

BlueParrott | 900 Chelmsford Street, Tower II, 8th Floor | Lowell, MA 01851 
Toll-Free (USA): 800-742-8588  |  Phone: +1 603-742-2888  |  

blueparrott.com

 

© 2018 GN Audio A/S. All rights reserved. APN 204012B      02/18