Virgin Pulse Inc. VP-SC001 Manual Do Utilizador

Overview

Setting Measurement Unit

Resetting the Scale

Resetting the scale will restore the scale back to factory settings. It will clear

any pre-set settings (such as units and paired user information). To reset,

please complete the following steps:

1. Press and hold the SETUP button until three dashed lines appear (approximately

16 seconds) then release it. A flashing "CO" message will appear on the display.

2. Once "CO" appears, press and hold the SETUP button for 5 additional seconds

then release it. All of the symbols will appear on the display to indicate that the

reset is complete.

1. When the scale is OFF, press the SETUP button on the back to turn on the

device.

2. Toggle (press) the SETUP button to choose between Lbs, Kg, and St.

3. When you reach the desired unit, stop pressing the button. Scale will turn off

automatically.

4. Place scale on a hard flat surface. It is now ready to take the measurement with

the set units.

Appears after holding for

5 seconds. If the button is

released, scale will enter

Bluetooth pairing mode.

Appears after holding for

9-13 seconds. If the button

is released, scale will enter

unit change mode.

Appears after holding for

16 seconds then releasing.

Appears after holding for

5 additional seconds. The

screen indicates that the

scale has been reset.

Progression

The scale contains a single multi-functional SETUP button.

The functions are

below. To land on the intended mode, you must release the SETUP button.

You can set the scale’s units by following steps:

Upgrading the Firmware

When new firmware is available on the server, you will receive a notification on the

Virgin Pulse app. During the firmware upgrade, the scale screen will display a

moving segment to indicate that the firmware upgrade is in progress

and the

percentage progress of the update.

NOTE: The scale's units can also be changed using the Virgin Pulse app.

Step 1

Step 2

NOTES:

1. Cycle repeats after step 6 until the percentage reaches 99.

2. The moving segment will move in a counter clockwise direction every 300ms.

3. Percentage progress and moving segment will not necessarily move at the same

rate and are independent of each other. Percentage increments by 1.

Example: