Shenzhen Golden Vision Technology Developing Co. LTD G3604B1080PH Manual Do Utilizador

1.Softwara installation&download and
install APP for smart phones

Search "V380"in the App Store 
install app

Search "V380"in Google play 
install app

Deives which support Smartlink configuration can issue a voice prompt"waitting for wifi smartlink 
configuration".The default setting of Other devices like outdoor cameras is APHotspot Modeand it 
can be configured accourding to "AP Quick Configuration"or "Hotspot Configuration".

1.The WIFI Camera default Mode is:WIFI smart Link

2.if you want to change the WIFI router,you need to reset the 

WIFI Camera:Push the WIFI Camera "Reset"button for10 

seconds(some model PTZ Camera’s reset button at the 

Bottom of the Camera),then the Camera will restore the 

default setting.

3.You can set the Camera to work as the independed Access 

Point(Hotpot)by push the "reset"button on the camera for 

1~2 seconds if the Camera smartlink mode,or change the 

mode by APP’s "Network setting" 

①Image capture   ②Sound monitoring   ③Voice intercom

④Lens direction  ⑤Image mode

①  ②  ③  ④  ⑤

First, user should make sure 
that the Mobile phone has 
already connected to the proper 
WIFI router Access point

Step 1:
Click the "WIFI Smart Link"
Menu,the ul show as below 
picture:

Step 2:
lnput the Access point Router’s 
password (make usre that its 
SSID is correct)and click the
"Next"botton

After you done that,the WIFI Camera will try to connect the Access Point Router with the SSID 
and password you have inputed.The prosess will take 30~60 seconds after the WIFI Camera 
connect the WIFI Access Point router successfully the WIFI Camera ID will be added to the devi
ce list Last,you can click the item on the device list,then you can see the live video

1.Open the phone WIFI,
Hot spots of connection
equipment(MV* is a hot
spot at the beginning).

2.On APP, click"Add 
networking equipment"

3.Click on the "local search", search out the equipment after clicking "add selected equipment", 
click "add equipment, equipment configuration and network settings, check the" station mode ", 
select the WIFI router, and fill in the router's WIFI password, and save, hear the voice prompt" 
routing connection equipment complete the "complete configuration

With AP Mode selected,please 
click "Device Unlinked"on your 
app,click "AP Quick Setup"and 
the device will be appeared.
(Because the default setting of 
outdoor cameras is AP Hotspot 
Mode,please long-press the 
Reset key to activate AP Hotpot 
Mode.)

6.More functions

7.Modify and delete

5.Device settings

4.Video playback

After choosing device,
you can configure it.The 
introduction to various 
funtions is as follows

1.Network Setting:
AP mode and station mode can be interchanged;

Set the Camera work as a independed Access Point(Hotpot),(The wifi Camera work 

AP mode:

as a WIFI Access Point,the prefix is"MV",ex,"MV31000000")

Set the Camera work as wifi station,the camera will connect the wifi router you 

Station mode:

selected and you can access you camera by internet

continuius recording;

automatic record:

record with alarm event;

record-on-alarm:

record the sound;

audio record:

standard-definition(VGA),high-definition(720P/960P)(choose high-definition 

record resolution:

record,with big record files and short storage time in memory card)

close or Open the alarm;

disarm switch:

master switch for all voice prompts;

voice masrer switch:

switch for movement alarm voice;

alarm voice prompts:

enable the voice prompts

voice language:

4.Date&Time:
able to adjust time of device;

5.User Management:
able to modify the username and password of camera

6.Static IP configurantion:
Equipment can be static IP is set to manual configuration or automatic configuration

7.Version information:
able to obtain information of device system and hardwate

1.Delete:

able to delete one device entry individually

able ti modify ID number,username and password 

2.Edit:

of the device(if you enter error username and password,
you can modify it here directly,rather than adding another 
device entry)

Protection,removal of equipment can be

3.Arm:

playback the snap picute 

4.Megs:

Long press the device ID to proceed bulk deletions(On 

5.

the android mobile phones do not support this operation)