SHENZHEN LIXIN TECHNOLOGY CO . LTD INATECKP6 Manual Do Utilizador
Use of Inateck P6
Startup
Note:
1) Inateck P6 will start sleep mode if there is no operation on it over
Note:
1) Inateck P6 will start sleep mode if there is no operation on it over
3 minutes. Short press on the trigger can wake it up.
2) When the distance between Inateck P6 and its adapter exceeds
the effective range, scanned data will be kept in the buffer of
Inateck P6. Quickly double press on the trigger can upload data
from buffer.
Inateck P6. Quickly double press on the trigger can upload data
from buffer.
Wireless Mode:
1. Insert the 2.4G USB adapter into the USB port of computer. The
initialization is completed if blue LED on the adapter blinks once.
2. Power on Inateck P6 by toggling switch from OFF to ON. Short
press the trigger to emit red laser beam and scan barcodes.
3. Open a f
ile on computer and move cursor to the blank where
scanning output should be placed. Scanning results can be
displayed on computer then.
displayed on computer then.
Wired Mode:
1. Connect Inateck P6 with computer via USB cable
2. Power on Inateck P6 by toggling switch from OFF to ON and short
2. Power on Inateck P6 by toggling switch from OFF to ON and short
press the trigger. Inateck P6 will continuously beep. Beep stops
after successful connection.
after successful connection.
3. Open a f
ile on computer and move cursor to the blank where
scanning output should be placed. Scanning results can be
displayed on computer then.
displayed on computer then.
Function Setup
(Note: The barcode marked by * means default setting of Inateck P6.)
Users must read setup barcodes in order to change the default
settings in Inateck P6 Barcode Scanner.
(Note: The barcode marked by * means default setting of Inateck P6.)
Users must read setup barcodes in order to change the default
settings in Inateck P6 Barcode Scanner.
Status indication
Buzzer Indication
LED Indication
Frequently Used Barcodes
Setting for Keyboard Language
1. Read Enter setup Barcode
2. Select and Scan your keyboard language Barcode
3. Scan Exit with Save Barcode to end language setting
Note: The keyboard language of Inateck P6 should keep
consistent with that on computer, otherwise, garbled might
appear in scanning result.
appear in scanning result.
Setting for Pref
ix/Suff
ix
Users can add pref
ix/suff
ix to scanning result. The pref
ix/suff
ix can
have 1 to 8 digits. More details are as below.
1. Scan Enter setup Barcode
1. Scan Enter setup Barcode
2. Scan Pref
ix Setting or Suff
ix Setting
3. Scan the character barcode (8 characters at the most). For
instance, H# is the pref
ix/suff
ix to be added to the scanning
result, scan the character barcode of H and # below.
4. Scan Exit with Save Barcode to end the setting
User Guide
P6 Barcode Scanner
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31