Max-Future Electronics Co. Limited M07030 Manual Do Utilizador

SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under licese.

Please read all instructions carefully

Remove the speaker from the box                                                               
Remove any packaging from the product                                                              
Place the packaging inside the box and store for safekeeping

Bluetooth Speaker LED Table Lamp
Micro USB cable
Aux cable
Instruction Manua

- Enjoy music wirelessly with great sound quality.
- Bluetooth wireless connection functionality.
- Table lamp with LED light. 

When using any electrical product, basic safety precautions should always 
be followed including the following:

Incorrect operation and improper use can damage the product and cause injury 
to the user.
Keep the unit away from heat sources, direct sunlight, humidity, water and any 
other liquids.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified 
electrician. Improper repairs may place the user at serious risk.
Do not put objects into any of the openings.
Indoor use only.
Keep the unit free from dust, lint etc.
Do not use the unit with wet hands.
Do not use the unit for anything other than its intended use.
Keep the unit out of reach of children.
This product is not a toy.
Do not use abrasive cleaning solvents to clean.
To minimize the risk of fire or electrical shock, avoid operating in wet conditions 
such as rain or humidity.
Do not expose to excessive heat such as sunshine, fire ect.
Never immerse the unit in water or any other liquid for cleaning purposes.
Always disconnect from the mains after use.

1

Used to charge the battery.

AUX IN play music.

Switch to power ON /OFF button to ON or OFF.

When charge the battery, Red LED light will 
illuminate red.
When the battery is fully charged, the LED 
indicator will switch off.

When the power ON / OFF of speaker switch 
to ON, the blue LED indicator will light.

Used to illumination.

Short touch the button switch to turn on/ off the 
LED lights, Hold touch the button switch to 
change brightness of LED lights.

Speaker

7

8

2

3

4

5

6

The speaker comes with a built in rechargeable battery. 
Before using it for the first time it is recommended you charge the battery fully. 
The device can also be used whilst powered and is charging.

Connect the USB charger cable to computer USB port or a USB wall charger (not included). 
Connect the other side to the USB charging slot of the Speaker, the battery charging LED indicator 
will illuminate red.
When the battery is fully charged, the LED indicator will switch off.
When the battery is running low, you will hear a tone to indicate the battery needs charging.

Switch to power on / off button to on, you’ll hear a tone and the Bluetooth mode will turn on 
automatically, the blue LED indicator will light.

Place the speaker and Bluetooth device (phone or music device) no further than 30 feet apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer 
to the manufacturer’s instructions for instructions on enabling Bluetooth on your device. 
Once you have activated Bluetooth on your device, select the pairing name “

Sylvania SP901” 

from the list of available Bluetooth devices. 
If required, enter the password ‘0000’ to confirm to pairing.
Once paired successfully, you will hear a tone indicating pairing successful.

Once you have paired the speaker with a device, the speaker will remember this device and will 
pair automatically when the device’s Bluetooth is activated and in range. You do not need to re-pair 
any previously connected devices.
The speaker will attempt to automatically connect to the last device it was paired with when 
Bluetooth mode turn on. If you want to pair it with a new device, please turn OFF your last 
Bluetooth device (phone or music device) then use your new device to search and select the 
pairing name. 

Once the speaker is paired with your device the music will transmit directly to the speaker. 
Please refer to your device’s user manual for further information.

Not all mobile phones support all the functions listed above. Please refer to your cell phone’s 
user’s manual for further information.
Certain functions and indication tones may vary depending on your mobile phone.

Once the speakers are paired with your device you can stream music wirelessly through the 
speaker. Select the track you wish to listen to and it will be streamed to your Bluetooth speaker. 
Should you encounter any problems while streaming please refer your device’s user manual 
for further information.

After the speaker is turned on, connect one end of the 3.5mm AUX cable (included) into AUX 
in jack, the other end of the Cable to connect MP3 / Smartphone to play music. When inserted 
the 3.5mm AUX cable to the AUX in jack, the Bluetooth will be disconnected automatically.

Bluetooth Speaker LED Table Lamp can be used the LED function independently of the speaker 
and be used as a regular table lamp.

Unplug the product from the supply if it is left unattended and before cleaning. 
NEVER immerse the product into water and use a dry cloth for cleaning

Turn off the power when not in use, clean and store safety.

Read the following recommendations before using the speaker. Following these you will be able 
to enjoy the product for many years.

Don’t use abrasive cleaning solvents to clean the speaker.
Do not expose the speaker to extremely high or low temperature as this will shorten the life 
of electronic devices, distort certain plastic parts.
Don’t dispose of the speaker in a fire as it will result in an explosion.
Don’t expose the speaker to contact with sharp objects as this will cause scratches and 
damage.
Don’t let the speaker drop on to the floor. The internal circuitry might get damaged.
Don’t attempt to disassemble the speaker as it may get damaged if you are not professional.
Do not expose the speakers to heat or fire. Avoid storage in direct sunlight.
Do not subject the speakers to mechanical shock.
Do not add any fluids or solids to your lamp.
Do not use the product if it has been damaged in any way.

Note: Battery life & charging time may vary based on usage & types of devices used.

Bluetooth 5.0

10 meters (max.)

1 x 3W

DC 5V / 500mA

is a trademark on a registered trademark of
Bluetooth SIG Inc.

Guidelines for protection of the environment

This appliance should not be put into the domestic garbage at the end of its useful life, 
but must be disposed of at a central point for recycling of electric and electronic domestic 
appliances.  This symbol on appliance, instruction manual and packaging puts your 
attention to this important issue. The materials used in this appliance can be recycled.  
By recycling used domestic appliances you contribute an important push to the 
protection of our environment. Ask your local authorities for information regarding 
the point of recollection.

Made in China

NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 

-Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help 
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following 
two conditions:  

(1) this device may not cause harmful interference, and  

(2) this device must accept any interference received,  including interference that may 

cause undesired operation.  

1

3

2

4

6

5

The device has been evaluated to meet general RF exposure requirement. The device 
can be used in portable exposure condition without restriction.