Kastle Systems International AIO-M Manual Do Utilizador
All In One Reader User Manual
The All In One reader is a RFID proximity card and Bluetooth
reader for Kastle access control systems. It is intended to be
used in conjunction with an interface board BLE Daughter Board
which piggy backs on to a KZDM or KZSRDR Board.
reader for Kastle access control systems. It is intended to be
used in conjunction with an interface board BLE Daughter Board
which piggy backs on to a KZDM or KZSRDR Board.
Notes on Use:
- Operating Temp: 0-49 degrees C
- Must use 22 AWG or larger with a wire run no longer than
- Must use 22 AWG or larger with a wire run no longer than
2000 ft
- All
Wiring shall be in accordance with the National
Electrical Code, ANSI/NFPA 70
-
The Reader is to be mounted in a protected premise
- Power to be supplied from KZDM, KZSRDR or UL 294 or UL 603 Listed power
supply
- No connection to reader shield per transient test setup