GuangZhou SunFieldAimo Electronic Technology Co. Ltd XYAM Manual Do Utilizador

Using the Controller

4

Press (REC) on your controller to toggle Recording mode ON or OFF.

Press and hold (REC) to toggle turn on/off the vibration setting. Press and hold

(REC) + (A) to set controller to “M-Normal.” Turn controller to desired

start point and press and hold (SET) + (C) to set lock point 1.

Turn controller to desired end point and press and hold (SET) + (D)

to set lock point 2.

To clear all lock points, press and hold (REC) + (D).

Go to the focus point of your choosing, press and hold (A) button until it flashes, 

your point is now set. Repeat with (B) (C) and (D) for multiple points. Press the 

same preset button to exit the preset mode. 

Press (SPEED) on the controller to adjust the motor speed.

Press and hold (POWER) + (REC) + (A) to set motor to damping 1 (Responsive +).

Press and hold (POWER) + (REC) + (B) to set motor to damping 2 (Responsive).

Press and hold (POWER) + (REC) + (C) to set motor to damping 3 (Smooth).

Press and hold (POWER) + (REC) + (D) to set motor to damping 4 (Smooth +).