Fuzhou Ewetime Electronic Co. Ltd 8270A3 Manual Do Utilizador
- 1 -
- 2 -
Item No.
COLOR WEATHER STATION
Owner’s Guide
Thank you for purchasing the Sharper Image Color Weather Station.
Please take a moment to read this guide and store it for future reference.
FEATURES
Adapter
19
20
21
21
22
23
24
25
23
24
25
26
27
1
8 9
10
11
13
12
14
15
1617
18
2
3
4
5
6
7
7
32
31
30
29
28
DESCRIPTION OF CONTROL
1. Calendar
2. Outdoor temperature / humidity external sensor
3. Sensor low battery indicator
4. Outdoor sensor signal strength
5. Tendency outdoor temperature / humidity
6. Channel external sensor
7. Outdoor temperature / humidity MAX/MIN records
8. Trend of barometer display
9. Alarm Clock icons
10. Time display
11. Icons weather forecast
12. Symbol Radio Control RCC
13. Weekday
14. Moon phase
15. Indoor temperature / humidity
16. Display low battery indicator
17. Tendency indoor temperature / humidity
18. Indoor temperature / humidity MAX/MIN records
2. Outdoor temperature / humidity external sensor
3. Sensor low battery indicator
4. Outdoor sensor signal strength
5. Tendency outdoor temperature / humidity
6. Channel external sensor
7. Outdoor temperature / humidity MAX/MIN records
8. Trend of barometer display
9. Alarm Clock icons
10. Time display
11. Icons weather forecast
12. Symbol Radio Control RCC
13. Weekday
14. Moon phase
15. Indoor temperature / humidity
16. Display low battery indicator
17. Tendency indoor temperature / humidity
18. Indoor temperature / humidity MAX/MIN records
19. SNZ/LIGHT button
20. MODE button
21. ALARM button
22. MEM button
23. UP/RCC button
24. DOWN button
25. CH button
26. External power supply socket
27. Battery Compartment 3xAAA
(batteries not included)
28. Wireless signal indicator (Flashes when data
is being sent to the display unit)
29. Integrated hang hole
30. TX button
31. TX channel selector, select external sensor
channel
32. Compartment 2xAA batteries
(batteries not included)
20. MODE button
21. ALARM button
22. MEM button
23. UP/RCC button
24. DOWN button
25. CH button
26. External power supply socket
27. Battery Compartment 3xAAA
(batteries not included)
28. Wireless signal indicator (Flashes when data
is being sent to the display unit)
29. Integrated hang hole
30. TX button
31. TX channel selector, select external sensor
channel
32. Compartment 2xAA batteries
(batteries not included)
• Compact system displays time, date, temperature
and weather forecast
• Six weather forecast graphics (Sunny, Partly
Sunny, Cloudy, Rainy, Stormy and Snowy)
• Syncs with U.S. Atomic Clock
• Displays indoor and outdoor temperature
in °C or °F
• Barometric pressure display
• Displays indoor and outdoor humidity
• Displays time, date and day
and weather forecast
• Six weather forecast graphics (Sunny, Partly
Sunny, Cloudy, Rainy, Stormy and Snowy)
• Syncs with U.S. Atomic Clock
• Displays indoor and outdoor temperature
in °C or °F
• Barometric pressure display
• Displays indoor and outdoor humidity
• Displays time, date and day
• Digital alarm with snooze
• Automatic Daylight Savings Time update
(optional)
• Displays mood phase
• Low battery indicator
• Dimmable LED backlight
• Includes wireless weather sensor (requires
2 AA batteries)
• Battery backup (requires 3 AAA batteries)
• Automatic Daylight Savings Time update
(optional)
• Displays mood phase
• Low battery indicator
• Dimmable LED backlight
• Includes wireless weather sensor (requires
2 AA batteries)
• Battery backup (requires 3 AAA batteries)
FUNCTION OF BUTTONS
MODE
ALARM
MEM,
UP/RCC
UP/RCC
Button
Mode
Standard mode
Press
Hold
Press
Hold
Press
Hold
Time setting
Alarm setting
----
----
----
----
----
----
----
ON/OFF alarm
Max. & Min. values
display
display
SNZ/LIGHT
----
----
----
Activate backlight for
10 seconds (when
using battery power).
10 seconds (when
using battery power).
Activate backlight for
10 seconds (when
using battery power).
10 seconds (when
using battery power).
Activate backlight for
10 seconds (when
using battery power).
10 seconds (when
using battery power).
Enter into
setting
setting
Enter into alarm
setting
setting
Access/exit RCC
receiving.
Remove Max. & Min.
values.
receiving.
Remove Max. & Min.
values.
Confirm
setting
setting
Confirm
setting
setting
Advance 1 step
at a time.
at a time.
Advance 1 step
at a time.
at a time.
Advance 8 steps
per second.
per second.
Advance 8 steps
per second.
per second.
DOWN/CH
Switch channel
Enter into
registration
mode
registration
mode
Go back 8 steps
per second.
per second.
Go back 8 steps
per second.
per second.
Go back 1 step
at a time.
at a time.
Go back 1 step
at a time.
at a time.
DEFAULT SETTINGS
When the device is first plugged in, the default settings are as follows:
Default time: 2015 / 12:00 / Thursday
Default temperature: °F
Barometer unit: hPa
Weather forecast: Partly Sunny
Default temperature: °F
Barometer unit: hPa
Weather forecast: Partly Sunny
GETTING STARTED
• Place 2 AA batteries into the wireless weather sensor.
• Place or hang the sensor outdoors.
• The range is 150 ft. (50m) unobstructed. The wireless range may be reduced by trees, walls, windows, etc.
• Do not place sensor in direct sunlight as this will give you an inaccurate temperature reading.
• Place or hang the sensor outdoors.
• The range is 150 ft. (50m) unobstructed. The wireless range may be reduced by trees, walls, windows, etc.
• Do not place sensor in direct sunlight as this will give you an inaccurate temperature reading.
When you first insert batteries or plug in the device, you will hear 1 beep, then the device will go into a
self-test mode, then RF receiving mode (for weather sensor), followed by RCC receiving mode (to sync
with U.S. Atomic clock). This will take about 3 minutes.
self-test mode, then RF receiving mode (for weather sensor), followed by RCC receiving mode (to sync
with U.S. Atomic clock). This will take about 3 minutes.
If you would like the clock to set itself, simply leave it alone and it should sync overnight with the U.S.
Atomic Clock. Or, you may set it manually with the following steps:
Atomic Clock. Or, you may set it manually with the following steps:
TIME SETTING MODE
TIME SETTING MODE (CONT.)
• In the time display mode, Press “MODE” for 2 seconds to enter time setting. The value to be set will
start flashing.
• Time zone setting: The default is EST. Press “UP” or “DOWN” to select
PST, MST, CST, EST, AST or NST.
• NST: Newfoundland Standard Time
start flashing.
• Time zone setting: The default is EST. Press “UP” or “DOWN” to select
PST, MST, CST, EST, AST or NST.
• NST: Newfoundland Standard Time
ALARM SETTING MODE
• In standard mode, press “ALM” quickly to enter alarm mode.
• In alarm mode, press “ALM” to turn the alarm ON or OFF. The alarm icon will appear to disappear.
• In alarm mode, hold the “ALM” button to enter the alarm setting mode. The hour value will begin to flash.
• The setting order is Hour >>> Minute >>> Exit.
• Press “UP/RCC, MEM” to advance one step at a time. Or, press and hold it to advance 8 steps per second.
• Press “DOWN/CH” to go back one step at a time. Or, press and hold it to go back 8 steps per second.
• Press “MODE” (or no key for 20 seconds) so exit and save the setting.
• In alarm mode, press “ALM” to turn the alarm ON or OFF. The alarm icon will appear to disappear.
• In alarm mode, hold the “ALM” button to enter the alarm setting mode. The hour value will begin to flash.
• The setting order is Hour >>> Minute >>> Exit.
• Press “UP/RCC, MEM” to advance one step at a time. Or, press and hold it to advance 8 steps per second.
• Press “DOWN/CH” to go back one step at a time. Or, press and hold it to go back 8 steps per second.
• Press “MODE” (or no key for 20 seconds) so exit and save the setting.
ALARM AND SNOOZE
The alarm will sound in the following sequence:
• 1 Beep for 1-10 seconds.
• 2 Beeps for 11-20 seconds.
• 3 Beeps for 21-30 seconds.
• Constant beeps for 31-120 seconds
• While the alarm is beeping, the alarm icon will flash.
• While the alarm is beeping, press the “SNZ / LIGHT” to active snooze. The alarm will snooze”
for 10 minutes, then resume beeping.
• To turn the alarm off, press any key OTHER THAN “SNZ / LIGHT” to return to normal time mode.
• 1 Beep for 1-10 seconds.
• 2 Beeps for 11-20 seconds.
• 3 Beeps for 21-30 seconds.
• Constant beeps for 31-120 seconds
• While the alarm is beeping, the alarm icon will flash.
• While the alarm is beeping, press the “SNZ / LIGHT” to active snooze. The alarm will snooze”
for 10 minutes, then resume beeping.
• To turn the alarm off, press any key OTHER THAN “SNZ / LIGHT” to return to normal time mode.
- 3 -
- 4 -
DAYLIGHT SAVINGS TIME (DST) MODE
• Most states observe Daylight Savings Time.
• To turn DST on or off, hold the “MODE” button into setting mode. You will see “EST” flashing.
Press “MODE” again. You will see “ON” flashing. The “ON” means DST function is on.
Press “UP” or “DOWN” to turn off the DST.
• When DST is on, this unit will update the time automatically to comply with Daylight Savings Time.
• To turn DST on or off, hold the “MODE” button into setting mode. You will see “EST” flashing.
Press “MODE” again. You will see “ON” flashing. The “ON” means DST function is on.
Press “UP” or “DOWN” to turn off the DST.
• When DST is on, this unit will update the time automatically to comply with Daylight Savings Time.
SELECTING FAHRENHEIT OR CELSIUS
• The default temperature unit is degrees Fahrenheit (°F).
• To switch to Celsius, press and hold the “MODE” button. You will see “EST” flashing.
• Press the “MODE” button 9 more times to scroll through the other settings. You will see °F flashing.
• Press “UP” or “DOWN” to switch from Fahrenheit to Celsius.
• Press “MODE” to confirm your selection and exit.
• To switch to Celsius, press and hold the “MODE” button. You will see “EST” flashing.
• Press the “MODE” button 9 more times to scroll through the other settings. You will see °F flashing.
• Press “UP” or “DOWN” to switch from Fahrenheit to Celsius.
• Press “MODE” to confirm your selection and exit.
• AST: Atlantic Standard Time
• EST: Eastern Standard Time
• CST: Central Standard Time
• MST: Mountain Standard Time
• PST: Pacific Standard Time
• Press “MODE” (or no key for 20 seconds) so exit and save the setting.
• Repeat this process to set the other values.
• Press “UP/RCC, MEM” to advance one step at a time. Or, press and hold it to advance 8 steps per second.
• Press “DOWN/CH” to go back one step at a time. Or, press and hold it to go back 8 steps per second.
• Press “MODE” (or no key for 20 seconds) so exit and save the setting.
• EST: Eastern Standard Time
• CST: Central Standard Time
• MST: Mountain Standard Time
• PST: Pacific Standard Time
• Press “MODE” (or no key for 20 seconds) so exit and save the setting.
• Repeat this process to set the other values.
• Press “UP/RCC, MEM” to advance one step at a time. Or, press and hold it to advance 8 steps per second.
• Press “DOWN/CH” to go back one step at a time. Or, press and hold it to go back 8 steps per second.
• Press “MODE” (or no key for 20 seconds) so exit and save the setting.
YD8270A-3+TX6-6