MARKLYN GROUP INC 70143 Manual Do Utilizador
User Manual
Shape of product
Front of remote Back of remote Battery of remote Side of remote
Operating instruction
1. After installing the 3V button battery, connect the host power supply and press the button
.
During the code matching , the lighting product will flash together with the indicator light on the
remote at the same time. After flashing for a few seconds, that is mean the code-matching is
successful.
remote at the same time. After flashing for a few seconds, that is mean the code-matching is
successful.
2.Usage for button
: Turn on and Turn off.
3.Usage for button
: Press this button once, the lighting product changes a flash mode (solid
lighting or flashing...), there are 9 modes in total , If you still press the button , the flash will not stop
and continue to cycle. When the button is not pressed, the current mode is displayed.
and continue to cycle. When the button is not pressed, the current mode is displayed.
4.Usage for button
:Set up for the lighting product on channel 1 , press once will display one of
flash mold.(Similar with button
),there are 9 mold in total .Press button
, the lighting product
will be lighting. Press button
,the lighting will be off.
5.The button 2,3,4 has the same control way as the button 1. Just to control the correspond lighting
product .
product .
6.The remote has 4 channels(1.2,3,4) for the lighting product , and control the flash mold for each
channel separately
channel separately