2Plus Electronic Industrial Ltd. GST123 Manual Do Utilizador
Installation
1. To attach ground stake, remove the hex screw, locking washer, and washer from the stake with the
included Allen wrench.
2. Use the same hex screw, locking washer, and washer to attach the stake to the pivot mount.(See
assembly diagram labeled “2” in the image of the above)
3.Position the projection by changing the angle of projector light
Installing Pattern Lens
Unscrew and remove the two screw holding the p
attern lens
in the projection light casing. Remove the p
attern
lens.
One slide is alreadyput in light projector.
Reinsert different p
attern lens
into the projection light casing, being careful to orient the p
attern lens correctly
with the arrow on the frame facing the front of the projection light.Finally, locking the two screws.
Remote Controller: