Sagetel Mobiles Co. Ltd AX1811 Manual Do Utilizador
Presentation
Inserting the SIM card
1.
Remove the back cover.
2.
Remove the battery.
3. Place the SIM card in the socket.
4. Replace the battery and the back cover.
Charging the phone
Connect the charger to an electrical outlet , and connect
the plug of the charger into the USB port on the top of
your phone.
The mobile screen will display the charging indicator.
After charging is finished, just pull out the plug.
Switching on the phone
To switch on the phone, long press on the power on/off key
.
Adding a new contact
You can use the phone's contacts feature to save the
contact name, number and caller ringtone. The phone
can save 300 phonebook contacts. SIM card number of
contacts stored s vary depending on its capacity.
1.
From the idle screen, press the upper right -
key and enter the Contacts menu
2.
In the contacts list, press the up navigation
key to select Add new contact.
3.
Fill in the fields.
4.
Press the upper left key to select Save.
Note: The new contact is then displayed in contact
Writing and sending an SMS
Message allows you to send, receive and edit
messages.
1.
Select Messages from the Menu screen.
2.
Select Write message
3.
Press the # key to switch the input
method, and type your message in the
text box.
4.
Once your message is written, press the
upper left key to enter the Options, menu.
5.
Select Send to and select the recipient's
number or add it from phonebook .
Launching a phone call
To launch a call, do as follows:
1.
From the idle screen, start typing the
number directly, or enter select the
number in the Contacts menu.
2.
Press the
key to launch the call.
3.
Press the
key to end the call
Setting date and time
1.
Enter the Menu screen.
2.
Select Settings.
3.
Select Phone settings.
4.
Select Time and date.
5.
You can manually set the date and time.
6.
Press the left validation key to save.
Setting an alarm
To set an alarm:
1.
Enter the Menu screen.
2.
Select Organizer / Alarm.
3.
Edit the alarm's settings and press the validation
key to save.
Using the device as a torch
To use the torch:
1.
Enter the Menu screen.
2.
Select Torch Light.
3.
Press the validation key to switch on the torch.
4.
Press the validation key once again to switch off
the torch.
In the idle screen, you can also long press the 8 key,
switch on/off the torch quickly.