Shanghai Yaolu Technology Co. Ltd. S03B03 Manual Do Utilizador

•  Click the "scan" function on the APP, after connecting successfully, 

click "unlock", slider opens automatically. 

• 

Fix the lock on the prob stand of bike, screw down the 4 bolts. 

-2-

-3-

•

 Apply to iOs 8.0 , Android version 

4.3 and higher, Bluetooth 4.0 version

•

Scan the QR code on lock, download 

and install the APP. 

• Slide the handle to the bottom side, hear "bi bi", lock successfully. 

Connect Bluetooth successfully, click “return bike”, then the bike

sharing experience finished.

* SIZE：168X180X42mm 
* Material: zinc alloy+ABS plastic cement
* Slider : 9mm
* Working temperature: -10℃~+60℃
* Storage temperature: -20℃~+80℃
* Product weight: 510g 
* Power： 

3.6V 3500mA Lithium battery 
3.6V 8000mA Lithium battery

Slider

Handle

180mm

57mm

168mm

•  3.6V 8000mA Lithium battery (Free of Charge)

•  When the power is low, please contact manufacturer or dealer to 

change new battery of the same specifications.

•  When the power is lower tha

n 20%,

 APP will warn you low battery; 

please change the battery in time.(Power lasts about 30 months normally.)

 

FCC Caution: 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 

this device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation..

Any changes or modifications not expressly approved by the party responsible for compliance could void the 

user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that interference will not occur in a 

particular installation.

If this equipment does cause harmful interference to radio or television reception,which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of 

the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and 

operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

FCC ID: 2ANDZ-S03B03

IC Caution:

RSS-Gen Issue 4 December 2014"&"CNR-Gen 4e Décembre 2014:

- English:

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: 

(1) This device may not cause interference, and 

(2) This device must accept any interference, 

including interference that may cause undesired operation of the device.

- French:

Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio 

exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le 

brouillageest susceptible d'encompromettre le fonctionnement.

-1-