Shenzhen Digitalor Technology Co. Ltd UR2100MT-POE Manual Do Utilizador

4. IP Address: The IP address of the SmarRack module, default value is

192.168.0.200, can be modified.

5. Subnet Mask: Default value is 255.0.0.0, can be modified.

6. Default Gateway: Default value is 192.168.0.1, can be modified.

7. Server IP: The IP address of server this SmarRack module communicate

with.

8. Server Port: The port number of server this SmarRack module

communicate with.

Controller Port: The port number of this SmarRack module.

 Save Settings

After all the content in Network Parameter fields are filled correctly,

click Save Settings button. Then the module will restart, and the RU

indicators will be on different colors. After start up, the status of RU

indicators will be back to normal.

TCP/IP Mode

TCP/IP mode is similar to UDP mode, the difference is the Search Device

Button is replaced by Connect Device. After clicking Connect Device,

need to enter the target module’s IP address and port number to

connect. After connecting to the module, other operation are the same

as UDP mode.