Shenzhen Meichi Electronics Co. Ltd. HSC600184 Manual Do Utilizador
-4-
1.Power off.
2.Install four-bladed vane to the junction box.
3.Adjust the cross plate to keep it
horizontal and lock the round-head
screw.
horizontal and lock the round-head
screw.
4.Use the holder to adjust the length
of the round head screw on the
four-bladed vane.
of the round head screw on the
four-bladed vane.
5.Use one head of the hook to hock
the lamp, the other head fixed
on the four-bladed Vane.
the lamp, the other head fixed
on the four-bladed Vane.
6.Connect the corresponding wires and
bare copper wires with a terminal
cap. Make sure that the wire cap is
screwed
bare copper wires with a terminal
cap. Make sure that the wire cap is
screwed
US standard Installation drawings