Mobius Mobility LLC 22007 Manual Do Utilizador
HEEL LOOP
To adjust the heel loop position, use two 4 mm
hex wrenches. Position one wrench in the top
inner heel loop bolt, and position the second
wrench in the bottom inner heel loop bolt.
Remove the bottom inner heel loop bolt using
the top wrench to prevent the whole bolt from
spinning. Reposition, then reinsert and tighten
the bolt.
hex wrenches. Position one wrench in the top
inner heel loop bolt, and position the second
wrench in the bottom inner heel loop bolt.
Remove the bottom inner heel loop bolt using
the top wrench to prevent the whole bolt from
spinning. Reposition, then reinsert and tighten
the bolt.
FOOTPLATE ANGLE
To adjust the footplate angle, loosen the three
bolts located around legrest. Manually move the
footplate angle to the desired location and
tighten the bolts.
bolts located around legrest. Manually move the
footplate angle to the desired location and
tighten the bolts.
M
a
in
te
n
a
n
c
e
146
DKPX-09006-001-Rev. 1.7