Mobius Mobility LLC 22007 Manual Do Utilizador
CHECK TIRE PRESSURE AND
CONDITION
CONDITION
Proper and equal tire pressure is needed in all
tires for good performance, long tire life, and
safety.
tires for good performance, long tire life, and
safety.
Tire pressure is 55 psi (380 kPa).
Visually inspect the tires daily to see if they have
lost pressure.
lost pressure.
•
Do not over-inflate the tires. The tires are
small and do not need much air. Use a tire
pressure gauge to check the pressure
periodically when inflating the tires. Be
careful not to release air from the tire when
checking pressure.
small and do not need much air. Use a tire
pressure gauge to check the pressure
periodically when inflating the tires. Be
careful not to release air from the tire when
checking pressure.
•
Slow air leaks may be due to a damaged tire
stem valve. Contact Technical Support if you
think you have a damaged tire stem valve.
stem valve. Contact Technical Support if you
think you have a damaged tire stem valve.
•
If you experience a flat tire, always transition
to Standard Mode as soon as it is safe to do
so.
to Standard Mode as soon as it is safe to do
so.
REPLACE TIRE OR TIRE
INNER TUBE
INNER TUBE
The following tools are required to replace the
tire inner tube:
tire inner tube:
•
5-mm hex wrench
•
Tire pump/air compressor
•
Pressure gauge
•
Small, flat head screwdriver or ballpoint pen
•
Support pieces (ex. blocks of wood)
•
Calibrated torque wrench. Range must
include 133 in.-lbs. (15 Nm) and 177 in.-lbs.
(20 Nm).
include 133 in.-lbs. (15 Nm) and 177 in.-lbs.
(20 Nm).
-
5-mm hex bit
M
a
in
te
n
a
n
c
e
164
DKPX-09006-001-Rev. 1.7