XENA SECURITY LIMITED ALARM-DL Manual Do Utilizador
User Manual
Product: DISC LOCK ALARM Model(s): XX6, XX10, XX14, XX15, XZZ6L
Your Xena Lock is Bluetooth enabled so that connect to your Smartphone and adjust the alarm
settings using the Xena BLE Lock app available for both Android and IOS.
settings using the Xena BLE Lock app available for both Android and IOS.
If you do not wish to use the app simply insert the battery as normal and use can use lock as a
conventional Xena alarmed lock.
conventional Xena alarmed lock.
Using the App.
1] Download and install the “Xena BLE Lock” App.
2] Insert battery into the alarm module. You will hear a confirmation “beep” once battery is correctly
inserted. Replace the battery door.
inserted. Replace the battery door.
3] Insert module into the lock and fit base plate.
4] Open the Xena App and follow the instructions on the App. Once you have named your device and
set a password you can adjust the settings and check your battery status. You can choose the user
language in the settings menu.
set a password you can adjust the settings and check your battery status. You can choose the user
language in the settings menu.
5] After initial setup up, the Bluetooth connection will only be active once the lock is placed on a disc.
If your app is closed or interrupted after setup you will need to place you lock on a disc to reconnect
the App.
If your app is closed or interrupted after setup you will need to place you lock on a disc to reconnect
the App.
6] Your Xena alarm will be paired to your Smartphone so there will be no need to enter your
password once the device is set up.
password once the device is set up.
7] When you remove the battery the password and device will be reset.
8] If you use another device to connect to your lock you will need to enter the password again.
9] You can select the user language in the settings menu.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
1