E Ink Corporation ARC00301 Manual Do Utilizador
47
18. Specifications and Restrictions
PRODUCT SPECIFICATIONS:
Overall dimensions: 239 mm W x 119.5 mm H x 22.5 mm D
(including mounting tabs); 215 mm W excluding mounting
tabs.
(including mounting tabs); 215 mm W excluding mounting
tabs.
Weight: approximately 335 grams (~12 oz.; controller only,
does not include mounting clips or screws)
does not include mounting clips or screws)
Input power requirements: 18 VDC @ 2A (5.5 mm O.D. jack,
center positive)
center positive)
Outputs: 128 total outputs; 96 “high-density” outputs and 32
“high-current” outputs
“high-current” outputs
High density outputs:
Max.
current:
4
mA
each
Max. driven area*:
0.2 m
2
(2 ft
2
)
High current outputs:
Max.
current:
50
mA
each
Max. driven area*:
2.5 m
2
(26.9 ft
2
)
Operating temperature range: 0 to 40 deg. C
Operating humidity range: 5 to 90% R.H., non-condensing
Storage temperature range: -20 to 65 deg. C
* Maximum active area of E Ink Prism™ material which may be
driven by each output. Other limitations may apply
depending on specific design of a given Prism™ tile.
depending on specific design of a given Prism™ tile.
4
WARNING: This product is intended for interior use only,
within the environmental conditions as described in the
specifications section of this manual. It should not be installed
or operated in any area or situation in which it will be exposed
to water, chemicals, exposed flame or heat sources.
specifications section of this manual. It should not be installed
or operated in any area or situation in which it will be exposed
to water, chemicals, exposed flame or heat sources.
WARNING: This product is to be used only in accordance
with the directions included in this manual and other user
documentation provided by E Ink. Failure to follow these
directions may compromise the safety of the product.
documentation provided by E Ink. Failure to follow these
directions may compromise the safety of the product.