Valerann Ltd. A2200 Manual Do Utilizador
-Confidential-
Valerann R&D
1
Valerann Smart road system – User manual
REV01
1. General
a) The following describes the method for installing and operating Valerann’s
Smart road system, comprising of road stud sensors, road-side communication
gateway, and the cloud-based server.
b) The entire system is pre-configured. Therefore, once the devices (i.e. the stud
and gateway) are connected, the system will start running automatically.
c) The protocol applies to AS3100 gateway and AS2200 road stud (see figure 1+2).
2. Procedure:
a)
Power-up the road studs by removing the battery-cutoff-magnet at the
bottom of the unit (will be done by Valerann personnel):
b)
Install the gateway on near-by pole and connect its power and ethernet
cables according to “Valerann Gateway - Installation Protocol - REV02”
c)
Install the road studs according to “Valerann Smart Road Stud -
Figure 2- AS2200 Smart road stud sensor unit
Figure 1- AS3100 - Roadside
communication gateway