Shenzhen Huiyu E-Commerce Co. Ltd. CTEZ81 Manual Do Utilizador
Attentions:
User manual
Please read the instructions
carefully before using.
Installation:
Mount on windshield:
Mount on air vent:
1. Insert the adjuster into the ball
joint adapter
1. Insert the adjuster into the ball
joint adapter
2. Insert the ball into the socket
at the back of bracket and
tighten
3. Clean the mounting area, push
suction cup firmly against
windshield and press the lever
to lock
2. Insert the ball into the socket at
the back of bracket and tighten
4. Connect wireless holder with
USB cable micro end
Mount on the dashboard:
1. Find a part of flat surface and
clean the mounting area, push
suction cup firmly against the
area and press the lever to lock
6. Open the clamp arms and put
your phone in, extend the foot
support to align the charging
center
5. Connect the other end to green
(fast charge) port of car charger,
insert the charger to car cigar
lighter
4. Open the clamp arms and put
your phone in, extend the foot
support to align the charging
center
3. Connect the other end to green
(fast charge) port of car charger,
insert the charger to car cigar
lighter
7. Open the clamp arms and put
your phone in, extend the foot
support to align the charging
center
2. Connect wireless holder with
USB cable micro end
1. Please use the product correctly according instructi ons
2. Please do not disassemble the product or throw it to fire
and water, to avoid leakage caused by electrical short
circuit
3. Please do not use wireless charger in high temperature,
wet, corrosive environment, to avoid leakage from caused
by damaged circuit
2. Please do not disassemble the product or throw it to fire
and water, to avoid leakage caused by electrical short
circuit
3. Please do not use wireless charger in high temperature,
wet, corrosive environment, to avoid leakage from caused
by damaged circuit
4. Please do not put wireless charger close to cards with
magnetic stripes or chips (ID card,credit card etc.)
to avoid demagnetization
magnetic stripes or chips (ID card,credit card etc.)
to avoid demagnetization
5. Please keep wireless charger at least 20 CM distance away
from implantable medical device (heart pacemaker,
Implantable cochlea etc.) to avoid potential interferences
from implantable medical device (heart pacemaker,
Implantable cochlea etc.) to avoid potential interferences
6. Please do safekeeping, do not let your kids treat wireless
charger as toy to avoid unwanted accidents
charger as toy to avoid unwanted accidents
6. Connect the other end to green
(fast charge) port of car charger,
insert the charger to car cigar
lighter
5. Connect wireless holder with
USB cable micro end
3. Insert the mount clips into the
car air vent louver and press
down the switch
4. Firstly turn the swith to direction
if too loose, turn to direction
The pictures only supplies the reference, please take the
actual product as the standard
actual product as the standard
wireless charging phone holder