SHENZHEN GLEEMAN TECHNOLOGY CO. LTD H800 Manual Do Utilizador

User Guide

Pick up our H800 bluetooth earbuds from 

charging base (carrying case), voice "Power 

on" prompts. Seconds later, "Left Channel", 

"Right Channel" & "Connected" voices 

remind earbuds being paired successfully 

with each other. In the meanwhile, LED 

indicator on left earbud blinks blue & red and 

right earbud blinks blue only. (Initial 

connection takes up 15-20 seconds)

Turn on the bluetooth function of your device, 

search and connect with H800 earbuds 

(Bluetooth name: H800). Voice "Pairing" 

means pairing is on process. When you hear 

"Pairing Successful" & "Second Device 

Connected", and both earbuds blink blue, you 

are ready to enjoy music now. Pairing 

password: 0000 (if necessary)

Music: Both earbuds have one button. One 

press on both buttons pauses or plays the 

music; Two presses on left earbud goes to 

next, on right earbud goes to previous; Triple 

presses on left/right earbud activates device 

voice assistant (Siri).

Phone Calls: Any phone calls coming in 

during the music playing automatically 

pauses the music and left earbud announces 

"Incoming call". One press on left earbud 

takes the call; Longer press for 2 seconds 

reject it with the voice "Call Reject"(Be 

Turn off Earbuds: Long press on button of 

any earbud for 3 seconds powers off; 

Standing by without connection for more than 

2 minutes turn off the earbuds; Putting back 

earbuds into the charging base also switches 

off them and go into charging process 

immediately.

2.

3.

4.

1.

1.

2.

Re-Connection: After the initial connection, 

any time picking up the earbuds from 

charging base will automatically connect and 

pair each other and the device.

3S

L

R

Siri

 

earbuds

2S 

1.

2.

Earbuds Charge: Voice "Battery Low" prompts 

& red light blink 5 seconds alert low battery. Put 

back earbuds into the charging base to 

recharge them. 

Charging Base Charge: LED indicator on 

charging base blinking red alerts low battery. 

Indicator remains blue means being fully 

charged.

FAQ

1. Check the power of earbuds. If they are no power, 

charge them. 

2. Take out the earbuds from charge seat and wait 

seconds, if they can’t turn on automatically, try to put them 

into charge seat again, and close the lid. Make sure the 

earbuds are charging in the seats, and then open lid, take 

out the earbuds once again. 

3. Press the function key about 2 seconds to start the 

machine. 

1. Restart the earbuds.

2. Check the environment, if there too much interference. 

Chose a non-interference place and use it in effective 

distance.  

3. Check the compatibility and calling quality of mobile 

phones.

1. Confirmed if there has electromagnetic radiation in the 

around.  

2. Check the suppression control of the mobile phone

1. Check the manual to make sure operate in the right way. 

2, Make sure the headset connected with the phone. 

3. Check the light and charging, confirmed the light flash 

Properly. 

1. Checked the mobile phone volume. 

2. If only one earbud has sound, check if it connecting 

success between left and right earbuds. 

3. Confirmed phone isn't in poor network and in the cache

4. Make sure the headset connected with the phone. 

5.Make sure there don’t have interference around and 

earbuds used in the effective distance.  

1. Check the power of earbuds, whether the single 

earphones are low - powered

2. Make sure the left and right earphones flash into pairing 

mode

3. Check whether the single earphone is connected to the 

mobile phone

Main Earbud: Left earbud, Left channel, Call 

Control, Music Control

Sub-Earbud: Right earbud, Right Channel, Call 

only, Music only

Power on/off

Pairing

Left Channel

Right Channel 

Connected

Incoming Call

Call Reject

Call Ended

Battery Low

Caution：If the earbuds are not  
charged for a long time, it may 
damage the  battery, please charge at 
least once every two months.

    

earbuds

cautious: hold for 3 seconds will turn off the 

earbuds). Press the left button any time to 

end the phone conversation and voice 

prompts "beep...beep...".

折页：扇形折

FAQ

1. Check the power of earbuds. If they are no power, 

charge them. 

2. Take out the earbuds from charge seat and wait 

seconds, if they can’t turn on automatically, try to put them 

into charge seat again, and close the lid. Make sure the 

earbuds are charging in the seats, and then open lid, take 

out the earbuds once again. 

3. Press the function key about 2 seconds to start the 

machine. 

1. Restart the earbuds.

2. Check the environment, if there too much interference. 

Chose a non-interference place and use it in effective 

distance.  

3. Check the compatibility and calling quality of mobile 

phones.

1. Confirmed if there has electromagnetic radiation in the 

around.  

2. Check the suppression control of the mobile phone

1. Check the manual to make sure operate in the right way. 

2, Make sure the headset connected with the phone. 

3. Check the light and charging, confirmed the light flash 

Properly. 

1. Checked the mobile phone volume. 

2. If only one earbud has sound, check if it connecting 

success between left and right earbuds. 

3. Confirmed phone isn't in poor network and in the cache

4. Make sure the headset connected with the phone. 

5.Make sure there don’t have interference around and 

earbuds used in the effective distance.  

1. Check the power of earbuds, whether the single 

earphones are low - powered

2. Make sure the left and right earphones flash into pairing 

mode

3. Check whether the single earphone is connected to the 

mobile phone

This device complies with Part 15 of the FCC rules. Operation is subject to the 

following two conditions: 1) this device may not cause harmful interference, and 2) 

this device must accept any interference received, including interference that may 

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that 

interference will not occur in particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement

This device complies with RF radiation exposure limits set forth for an 

uncontrolled environment. This transmitter must not be co-located or operating in 

conjunction with any other antenna or transmitter.

Ture Wireless Earbuds