DIAS Automotive Electronic Systems Co. Ltd. TS211 Manual Do Utilizador
7
4. DISPLAY INTERFACE INTRODUCTION
TPMS display is electrified when the vehicle key is switched to “ON”.
The display shows the value of temperature and pressure recorded last
time as the following figure 3.
After the vehicle starts and its speed is higher than 20km/h, every
date shown in figure 3 updates real time to up to date status.
P/T units
P/T value
Tyre position
High P/T alarm indication
P/T alarm indication Malfunction alarm indication
Low pressure alarm indication Fast-leaking alarm indication
Annotate:
P—pressure, T—temperature. As to pressure unit: 1bar=10
5
Pa(equal approximately
to 1 standard atmospheric pressure)
Fig3 TPMS display interface introduction
Warm Reminders:
Only upon the condition that the vehicle starts and the vehicle
speed is higher than 20km/h, every date shown on TPMS
display may updates real time to up to date status.