Ei Electronics EIA200MRF Manual Do Utilizador

House code the Alarms as follows:

3. Before fitting the Alarm to the mounting plate, press and hold the ‘House Code’ 

button on the rear of the RadioLINK module until the blue light comes on (see figure 

3) and then release.
4. Twist the Alarm onto its mounting plate.
5. Similarly press and hold the House Code button on the second Alarm until its 

blue light comes on and then release. Twist the Alarm onto its mounting plate. 

Put all the remaining Alarms into House Code mode similarly and attach to the 

mounting plate in the same manner in less than 15 minutes. (They automatically 

exit house code mode after 30 minutes).

4

Large

hole

nearest

front

wall

Mounting Plate

Mounting Plate

Mounting Plate

Mounting Plate