Orion Electric Co Ltd M115A Manual Do Utilizador

17

Press the On/Standby [

8] button.

The CD receiver comes on, and the display lights up.

Press the On/Standby [

8] button again to set the CD 

receiver to Standby.
You can also use the [

8 ON/STANDBY] button on the 

CD receiver.
During the use of your iPod/iPhone/iPad connected to 
the CD receiver with a USB cable, if the connection 
mode of the CD receiver is set to iPod (see page 22), 
“Charging” appears on the display of the CD receiver 
and your iPod/iPhone/iPad will be charged even with the 
CD receiver on standby.

Tip:
• For details on power management settings, see “Set-

ting Auto Standby (ASb)”.

With Auto Standby, you can set the CD receiver so that 
it will be automatically turned off and enter the standby 
mode if there is no operation for 20 minutes with no 
audio input.

The default setting is “Off”.

Make settings for this function while playback is 
stopped.

Press and hold down the remote 
controller’s [SLEEP] button (about 3 
seconds).
If this setting is “On”, “AutoStby On” will appear 
on the CD receiver’s display.

Note:
• To switch between “On” and “Off”, repeat this 

procedure.

• If an iPod/iPhone/iPad is connected, ASb will not 

operate because the connected unit is being charged.

• If playback is paused, the power will remain on even 

after 20 minutes have elapsed; the Auto Standby 
function will not operate.

• With Bluetooth Standby “On”, the CD receiver will 

enter the Bluetooth Standby mode if the Auto Standby 
function is enabled (see page 23).

You can select CD, iPod (USB), FM, AM, Bluetooth, or 
LINE, which can be an external component.

To select the input source, use the remote controller’s 
Input Selector buttons. On the CD receiver, press the 
[INPUT] button repeatedly.

The input sources are selected in the following order.

You can also use the CD receiver’s VOLUME [–]/[+] 
buttons.

You can temporarily mute the output of the CD receiver.

The CD receiver is muted.

“Muting” appears on the display for a few seconds. The 
MUTING indicator flashes continuously while the CD 
receiver is muted.

Note:
• To unmute, press the [MUTING] button again or 

adjust the volume.

• Muting is automatically cancelled when the CD 

receiver is set to standby.

You can connect a pair of stereo headphones (ø3.5 mm, 
1/8-inch phone plug) to the receiver’s headphones [

=] 

jack for private listening.

Note:
• Always turn down the volume before connecting your 

headphones.

• While the headphones plug is inserted in the 

headphones [

=] jack, the speakers are turned off.

FM

 iPod (USB)

LINE

Bluetooth

CD

AM

E39_CS-355_En_120614.book  17 ページ  ２０１２年６月１４日　木曜日　午後１時４８分

TENTATIVE