Orion Electric Co Ltd M210A Manual Do Utilizador
30
On screen display can be switched on or off when you
press the DISPLAY button.
press the DISPLAY button.
The unit supports the Progressive scanning system as
well as the conventional interlaced scanning system.
If your TV is equipped with component jacks which
support the progressive video input, you can enjoy high
quality picture by making the Progressive scanning
mode active.
well as the conventional interlaced scanning system.
If your TV is equipped with component jacks which
support the progressive video input, you can enjoy high
quality picture by making the Progressive scanning
mode active.
1
Press PROGRESSIVE in the stop mode.
The PROGRESSIVE indicator “
The PROGRESSIVE indicator “
” on the display
window will light.
2
Press PLAY to start playback.
• To make the progressive scanning mode inactive, press
PROGRESSIVE in the stop mode.
The PROGRESSIVE indicator “
The PROGRESSIVE indicator “
” on the display
window will go off.
About PROGRESSIVE SCANNING MODE
To display video on the TV screen, the conventional
scanning method is called “Interlaced scanning.” With this
method, only half of the horizontal lines are displayed at a
time. So two fields complete a single picture (frame); i.e.,
the first field, containing all the odd-numbered lines, is
displayed followed by the second field, containing all the
even-numbered lines.
The Progressive scanning system scans all horizontal
lines at a time, so you can double the number of lines
compared with the interlaced scanning, resulting in a high-
density, flicker-free picture.
scanning method is called “Interlaced scanning.” With this
method, only half of the horizontal lines are displayed at a
time. So two fields complete a single picture (frame); i.e.,
the first field, containing all the odd-numbered lines, is
displayed followed by the second field, containing all the
even-numbered lines.
The Progressive scanning system scans all horizontal
lines at a time, so you can double the number of lines
compared with the interlaced scanning, resulting in a high-
density, flicker-free picture.
To enjoy a progressive scanned video, the TV connected
to the unit must have Progressive inputs.
Depending on the material source format, DVD discs can
be classified into two categories; film and video (note that
some DVD discs contain both a film source and a video
source). Film sources are recorded as 24-frame-per-
second information, while (NTSC) video sources are
recorded as 30-frame-per second (60-field-per-second
interlaced) information.
When the unit plays back a film source material,
uninterlaced progressive output signals are created using
the original information. When a video source material is
played back, the unit interleaves lines between the
interlaced lines on each to create the interpolated picture
and outputs as the progressive signal.
to the unit must have Progressive inputs.
Depending on the material source format, DVD discs can
be classified into two categories; film and video (note that
some DVD discs contain both a film source and a video
source). Film sources are recorded as 24-frame-per-
second information, while (NTSC) video sources are
recorded as 30-frame-per second (60-field-per-second
interlaced) information.
When the unit plays back a film source material,
uninterlaced progressive output signals are created using
the original information. When a video source material is
played back, the unit interleaves lines between the
interlaced lines on each to create the interpolated picture
and outputs as the progressive signal.
NOTES:
• Some discs may not be played back with the progressive scan-
• Some discs may not be played back with the progressive scan-
ning mode correctly because of the disc characteristics or re-
cording condition.
cording condition.
• There are some progressive TV and High-Definition TV sets that
are not fully compatible with the unit, resulting in the unnatural
picture when playing back a DVD disc in the Progressive scan-
ning mode. In such a case, use the Interlaced scanning mode.
picture when playing back a DVD disc in the Progressive scan-
ning mode. In such a case, use the Interlaced scanning mode.
• You cannot make the progressive scanning mode active in fol-
lowing cases.
– The unit is in the VCR mode.
– The disc is played back in the DVD mode.
– The unit is in the VCR mode.
– The disc is played back in the DVD mode.
Setting on screen display
Progressive scan
Each press of DISPLAY, the status display of the disc will
appear on the screen and change as follows.
appear on the screen and change as follows.
DVD
AUDIO CD
Status display of disc
To make status display disappear, press DISPLAY again.
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
appear on the screen and continue displaying.
Press
or
to select
“On” or “Off”.
1
2
3
To make SETUP screen disappear, press SETUP.
4
On:
On screen displays appear when you press any
buttons (factory setting).
buttons (factory setting).
Off:
On screen displays do not appear when you press
any buttons except SETUP, SEARCH MODE,
PLAY MODE, MARKER and DISPLAY.
any buttons except SETUP, SEARCH MODE,
PLAY MODE, MARKER and DISPLAY.
Press
or ENTER, then
press
or
to select
“Display”.
Press SETUP in the stop mode.
Press
or
to select
option.
NOTES:
• This function works only during playback of Dolby Digital
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
Press
or
to select
desired setting.
1
Press SETUP in the stop mode.
Press
or
to select
option.
2
3
Press
or ENTER to
select “DRC”.
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
the dynamic range so as to achieve a suitable sound
for your equipment.
Dynamic Range Control
On:
Loud sound such as explo-
sion or similar is toned down slightly when played
back. This makes it suitable for when it is connected
to a stereo.
Off:
It plays back at the recording level on the disc.
Loud sound such as explo-
sion or similar is toned down slightly when played
back. This makes it suitable for when it is connected
to a stereo.
Off:
It plays back at the recording level on the disc.
Advanced function of DVD section
NOTE:
You also can change the scan-
ning mode by selecting Output in
You also can change the scan-
ning mode by selecting Output in
the
option.
00:34:56 01:12:33
00:34:56 01:12:33
1/9
Title
1/99
1/8
1/32
Chapter 1/999
Eng DolbyDigital
Eng
Eng
34:56
71:33
Track 11/99
Tv Screen
Display
Picture Mode
Display
Picture Mode
/Setup/Return
4:3
Auto
On
DRC
/Setup/Return
Off
Password
Parental
Output
Parental
Output
Off
Interlace
Interlace
Progressive
/Enter/Setup/Return
----
2F3PJ01A[E](28-BACK)
11/2/05, 11:47 AM
30