Orion Electric Co Ltd M2D8C Manual Do Utilizador

Press Play or DVD Eject.
The disc tray closes automatically.

On the screen, 

 changes to “Reading” and then play-

back will commence.

• A  menu screen may appear on the TV screen, if the

disc has a menu feature. In this case, press 

, 

,  ,

 

 or Enter to operate a menu feature.

Press DVD Eject.
The disc tray will open.

Place a disc onto the tray.
Hold the disc, position it with the printed label side up, align
it with the guides, and place it in its proper position.

Press Stop to end playback.
• The DVD/VCR memorizes the stopped point, depend-

ing on the disc. “

” appears on the screen. Press Play

to resume playback (from the scene point).

• If you press Stop again (“   ” appears on the screen) or

unload the disc, the DVD/VCR will clear the stopped
point.

Then press DVD Eject.
The disc tray opens.
Remove the disc and press Power.
The disc tray closes automatically and DVD/VCR turns off.

NOTES:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region

Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your
disc again (See pages 23 and 27).

• Some discs may take a minute or so to start playback.
• A “Prohibition” symbol 

 may appear at the upper left of the

screen. This symbol means either the feature you tried is
not available on the disc, or the DVD/VCR can not access
the feature at this time. This does not indicate a problem
with the DVD/VCR.

• When you set a single-faced disc label downwards (ie. the

wrong way up) and press Play or DVD Eject, “Reading” will
appear and remain on the screen for approx. 40 seconds and
then it will change to “Incorrect Disc”.

• Some playback operations of DVDs may be intentionally fixed

by software producers. Since this DVD/VCR plays DVDs
according to the disc contents the software producers de-
signed, some playback features may not be available. Also
refer to the instructions supplied with the DVDs.

• When playing DTS-encoded Audio CDs, excessive noise will

be heard from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take
proper precautions when the analog stereo outputs of the
DVD/VCR are connected to an amplification system.

Press F.FWD during normal playback.
Each press of F.FWD will increase the speed of the search

(x2), 

(x4), 

(x8), 

 (x20).

• To resume normal playback, press Play.

Press REW during normal playback.
Each press of REW will increase the speed of the search 
(x2), 

 (x4), 

 (x8), 

 (x20).

• To resume normal playback, press Play.

Press Pause during normal playback.

To resume normal playback, press PLAY.

Press Pause during still playback.
One frame is advanced each time you press Pause.

To resume normal playback, press Play.

Press Slow during normal playback or still playback.
Each press of Slow will change the speed of the slow x1/2,
x1/4, x1/6, x1/7.

• To resume normal playback, press Play.
• To resume the still playback, press Pause.

Press  Skip (7

7

7

7

7)  Forward or Skip (6

6

6

6

6)  Reverse during

playback to locate a chapter that you want to watch.
Each time you press the button, a chapter or track is skipped.

NOTE:
The unit is capable of holding a still video image or On screen
display image on your television screen indefinitely.  If you leave
the still video image or On screen display image displayed on
your TV for an extended period of time, you risk permanent
damage to your television screen.  Projection televisions are
very susceptible.

NOTE:
You can use the Pause, Slow, Search or Skip feature in the
zoom mode.

Press Zoom during playback.
The center part of the image will be zoomed in.
Each press of Zoom will change the ZOOM 

1

(x 1.3), 

2 (x 1.5) and 

3 (x 2.0).

Press 

     

/

     

 or   /

     

 to view a different part of the frame.

You may move the frame from the center position to UP,
DOWN, LEFT or RIGHT direction.

In the zoom mode press Zoom repeatedly to return to a

1:1 view (

 Off).

The screen saver operates when you leave the unit in DVD
stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back to
normal.

 2D81221A[E] (24-26)

7/2/04, 9:28 AM

24