Orion Electric Co Ltd M4F0A Manual Do Utilizador

NOTE: Since the VCR has its own TV tuner, it is not actually necessary to have the TV turned on in order to make

a recording. Turning on the TV merely allows confirmation of the proper channel settings on your VCR.

CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR.
• Press the TV/VCR selector button to select the
  VCR mode.

When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.

Load a cassette tape with the erase prevention
tab intact.
The VCR will automatically turn on.

00 : 00 : 00  SP

The SP, LP or SLP will appear on the screen about 4
seconds.

UHF

14-69

STD/HRC/IRC

14-36

(A) (W)

37-59

(AA) (WW)

60-85

(AAA) (ZZZ)

86-94

(86) (94)

95-99

(A-5) (A-1)

100-125

(100)(125)

01

(5A)

TV

CATV

VHF
2-13

VHF
2-13

Press the SPEED selector button to select the
desired tape speed SP, LP or SLP.

Press the direct channel selection buttons or the

CHANNEL 

▲

 or 

▼

 button to select the channel

to be recorded.

1-9

10-19

20-99

100-125

Press 0 twice and then 1-9 as required.
(Example: To select 2, Press 002.)
Press 0 first and then the remaining 2
digits in order from left to right.
(Example: Press 018 for 18.)
Press 2 digits in order. (Example: Press
22 for 22.)
Press the 3 digits in order. (Example:
Press 110 for 110.)

CH 110

 4C73101B(P35-40)

17/9/99, 4:09 PM

35