Panasonic Corporation of North America DY-WL10 Manual Do Utilizador
PZML0004A
F1109BL1010
Operating Instructions
Manuel d’utilisation
Wireless LAN Adaptor
Adaptateur de réseau local sans fil
Model No.
DY-WL10
Modèle
DY-WL10
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
C Panasonic Corporation 2009
Printed in Japan
Imprimé au Japon
Printed in Japan
Imprimé au Japon
PP
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
This wireless LAN adaptor is intended for use with
Panasonic wireless LAN-compatible televisions, players,
recorders, etc.
(This wireless LAN adaptor is not designed to use with PC.)
Panasonic wireless LAN-compatible televisions, players,
recorders, etc.
(This wireless LAN adaptor is not designed to use with PC.)
1
USB extension cable (K2KYYYY00064)
≥ Use according to the connection status of the device to be connected. Please refer to the
appropriate instruction manual for details on how to use.
≥ Do not use any other USB extension cables except the supplied one.
≥ Product numbers correct as of November 2009. These may be subject to change.
≥ To order accessories, call the dealer from whom you have made your purchase.
≥ To order accessories, call the dealer from whom you have made your purchase.
Messages such as “No Adaptor” is displayed.
≥ Check if this unit is inserted fully and securely.
≥ Try removing this unit once, and inserting it again.
If it does not get recognized even after performing the above, consult the dealer where you purchased this unit.
≥ Check if this unit is inserted fully and securely.
≥ Try removing this unit once, and inserting it again.
If it does not get recognized even after performing the above, consult the dealer where you purchased this unit.
The following limits are in place regarding the usage of this device. You must be aware of these limits
before using this device.
Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to
obey these limits, or to any condition of use or disuse of this device.
≥ This device is to be used as a wireless LAN device.
≥ Do not use this device to connect to any wireless network for which you do not have usage rights.
before using this device.
Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to
obey these limits, or to any condition of use or disuse of this device.
≥ This device is to be used as a wireless LAN device.
≥ Do not use this device to connect to any wireless network for which you do not have usage rights.
During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do
not have usage rights may be displayed; however, using these networks may be regarded as illegal access.
not have usage rights may be displayed; however, using these networks may be regarded as illegal access.
≥ Data transmitted and received over radio waves may be intercepted and monitored.
≥ This wireless LAN adaptor contains delicate electronic components.
≥ This wireless LAN adaptor contains delicate electronic components.
Please use this adaptor in the manner in which it was intended and follow the following points:
j Do not expose the adaptor to high temperatures or direct sunlight.
j Do not bend, or subject the adaptor to strong impacts.
j Keep the adaptor away from moisture.
j Do not disassemble or alter the adaptor in any way.
j Do not attempt to install the adaptor in any incompatible device.
j Do not expose the adaptor to high temperatures or direct sunlight.
j Do not bend, or subject the adaptor to strong impacts.
j Keep the adaptor away from moisture.
j Do not disassemble or alter the adaptor in any way.
j Do not attempt to install the adaptor in any incompatible device.
≥ Select an 802.11n (2.4 GHz or 5 GHz) wireless router (Access point).
Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection
interruptions or other problems. Also, set encryption type to “AES”.
interruptions or other problems. Also, set encryption type to “AES”.
≥ For how to connect or use this wireless LAN adaptor
Please refer to the respective operating instructions.
≥ For information on devices confirmed for use with this wireless LAN
adaptor
Please refer to the Panasonic website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Accessory
ENGLISH
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and
5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating
effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological
effects might occur, but such findings have not been confirmed by additional research.
Wireless LAN adaptor (DY-WL10) has been tested and found to comply with FCC/IC radiation exposure limits set forth for an
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of
the IC radio frequency (RF) Exposure rules.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and
5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating
effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological
effects might occur, but such findings have not been confirmed by additional research.
Wireless LAN adaptor (DY-WL10) has been tested and found to comply with FCC/IC radiation exposure limits set forth for an
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of
the IC radio frequency (RF) Exposure rules.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation
with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or
modifications not approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation
with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or
modifications not approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus complies with Canadian ICES-003.
Product Identification Marking is located on the bottom of unit.
When this unit is not recognized
Precautions
* An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular
network. Transmission is possible if the SSID matches for both devices.
Wireless LAN Adaptor is prohibited from export or bringing into nations* upon which the United
States place embargoes.
Wireless LAN Adaptor is subject to Export Administration Regulations (EAR) due to the installation
of encryption device made in the United States. (Current as of November 2009)
* Cuba, Iran, Syria, North Korea, Sudan etc.
States place embargoes.
Wireless LAN Adaptor is subject to Export Administration Regulations (EAR) due to the installation
of encryption device made in the United States. (Current as of November 2009)
* Cuba, Iran, Syria, North Korea, Sudan etc.
Cher client
Nous vous remercions d’avoir arrêté votre choix sur cet appareil.
Pour en tirer un rendement optimal, lire attentivement le présent manuel.
Avant de raccorder, régler ou utiliser l’appareil, il est recommandé de lire attentivement le manuel
d’utilisation. Conserver ce manuel.
Pour en tirer un rendement optimal, lire attentivement le présent manuel.
Avant de raccorder, régler ou utiliser l’appareil, il est recommandé de lire attentivement le manuel
d’utilisation. Conserver ce manuel.
Cet adaptateur de réseau local sans fil est conçu pour
utilisation avec les téléviseurs, lecteurs et enregistreurs
Panasonic compatibles avec un réseau local sans fil.
(Cet adaptateur de réseau local sans fil n’est pas conçu
pour être utilisé avec un PC.)
utilisation avec les téléviseurs, lecteurs et enregistreurs
Panasonic compatibles avec un réseau local sans fil.
(Cet adaptateur de réseau local sans fil n’est pas conçu
pour être utilisé avec un PC.)
1
Câble prolongateur USB (K2KYYYY00064)
≥ Utilisez-le selon l'état de la connexion de l'appareil à raccorder. Veuillez vous reporter au
manuel d’utilisation approprié pour plus de détails sur son fonctionnement.
≥ N’utilisez pas d’autres câbles prolongateurs USB à l’exception de celui fourni.
≥ Les numéros de modèle des produits sont à jour depuis novembre 2009. Ces numéros peuvent
être modifiés sans préavis.
≥ Pour la commande d’accessoires, contactez le détaillant où l’appareil a été acheté.
Les messages tels que “Aucun adaptateur” sont affichés :
≥ vérifiez que l’adaptateur soit bien inséré à fond et de façon sécuritaire;
≥ ressayez en retirant l’adaptateur et en l’insérant de nouveau.
Si l’adaptateur n’est toujours pas reconnu, consultez le détaillant où l’appareil a été acheté.
≥ vérifiez que l’adaptateur soit bien inséré à fond et de façon sécuritaire;
≥ ressayez en retirant l’adaptateur et en l’insérant de nouveau.
Si l’adaptateur n’est toujours pas reconnu, consultez le détaillant où l’appareil a été acheté.
Les limites suivantes ont été établies quant à l’usage de cet appareil. Vous devez connaître ces limites
avant d’utiliser cet appareil.
Panasonic n’assume aucune responsabilité pour tout dommage pouvant être causé par l’omission du
respect de ces limites ou toute autre condition d’usage ou l’abandon de cet appareil.
avant d’utiliser cet appareil.
Panasonic n’assume aucune responsabilité pour tout dommage pouvant être causé par l’omission du
respect de ces limites ou toute autre condition d’usage ou l’abandon de cet appareil.
≥ Cet appareil doit être utilisé en tant qu’appareil de réseau local sans fil.
≥ Ne pas utiliser cet appareil pour la connexion à un réseau sans fil pour lequel vous ne
≥ Ne pas utiliser cet appareil pour la connexion à un réseau sans fil pour lequel vous ne
détenez pas de droits d’usage.
Au cours du processus de recherche automatique dans un environnement de réseau sans fil, il peut arriver
que des réseaux sans fil (SSID*) pour lesquels vous ne détenez pas de droits d’usage soient affichés; or,
l’utilisation de tels réseaux pourrait être considérée comme relevant d’un accès illégal.
Au cours du processus de recherche automatique dans un environnement de réseau sans fil, il peut arriver
que des réseaux sans fil (SSID*) pour lesquels vous ne détenez pas de droits d’usage soient affichés; or,
l’utilisation de tels réseaux pourrait être considérée comme relevant d’un accès illégal.
≥ Les données émises et reçues par ondes radio peuvent être interceptées et surveillées.
≥ Cet adaptateur de réseau local sans fil comporte des composants électroniques délicats.
≥ Cet adaptateur de réseau local sans fil comporte des composants électroniques délicats.
Veuillez l’utiliser aux fins pour lesquelles il a été conçu et prendre les précautions suivantes :
j Ne pas exposer l’adaptateur à des températures élevées ou à la lumière directe du soleil.
j Ne pas plier l’adaptateur ni lui faire subir de chocs violents.
j Protéger l’adaptateur de l’humidité.
j Ne pas démonter ni modifier l’adaptateur.
j Ne pas tenter d’installer l’adaptateur dans un appareil non compatible.
j Ne pas exposer l’adaptateur à des températures élevées ou à la lumière directe du soleil.
j Ne pas plier l’adaptateur ni lui faire subir de chocs violents.
j Protéger l’adaptateur de l’humidité.
j Ne pas démonter ni modifier l’adaptateur.
j Ne pas tenter d’installer l’adaptateur dans un appareil non compatible.
≥ Sélectionner un routeur sans fil (point d’accès) 802.11n (2,4 GHz ou 5 GHz).
L'utilisation simultanée avec un four à micro-ondes, téléphone sans fil, etc. à 2,4 GHz peut
interrompre la connectivité ou causer d'autres problèmes. ll faut également établir le type de
chiffrement à ''AES''.
interrompre la connectivité ou causer d'autres problèmes. ll faut également établir le type de
chiffrement à ''AES''.
≥ Pour les instructions sur le raccordement ou l’utilisation de cet
adaptateur de réseau local sans fil
Veuillez vous reporter aux manuels d’utilisation des appareils respectifs.
≥ Pour les informations concernant les appareils pouvant être utilisés
avec cet adaptateur de réseau local sans fil
Veuillez vous reporter au site Web global de Panasonic.
http://panasonic.jp/support/global/cs/
(En anglais seulement.)
http://panasonic.jp/support/global/cs/
(En anglais seulement.)
Accessoires
FRANÇAIS
CE QUI SUIT S'APPLIQUE AU CANADA ET AUX ÉTATS-UNIS
Cet appareil est conforme à la section 15 de la réglementation de la FCC et à la section RSS-Gen de la réglementation IC. Son
utilisation est soumise aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférence et (2) cet appareil doit
tolérer les différentes interférences reçues, y compris les interférences susceptibles de provoquer un dysfonctionnement.
Cet émetteur ne doit pas être placé à proximité d’une autre antenne ou d’un autre émetteur, ni être utilisé de pair avec de tels autres
appareils.
Ce produit est strictement destiné à un usage en intérieur en raison de son fonctionnement dans la bande de fréquence 5,15 à 5,25
GHz. La FCC et IC exigent que cet appareil soit utilisé en intérieur pour la plage de fréquence entre 5,15 et 5,25 GHz afin de réduire
les éventuelles interférences nuisibles au canal commun des systèmes de service mobile par satellite. Des radars haute puissance
sont désignés utilisateurs primaires des bandes 5,25 à 5,35 GHz et 5,65 à 5,85 GHz. Ces stations radars peuvent causer des
interférences et(ou) endommager l’appareil.
Les connaissances scientifiques disponibles ne font état d’aucun problème de santé associé à l’utilisation d’appareils sans fil à faible
puissance. Par contre, il n’existe aucune preuve que ces appareils ne posent absolument aucun risque pour la santé. Les appareils
sans fil de faible puissance émettent de bas niveaux d’énergie radiofréquence (RF) dans la plage des micro-ondes pendant leur
utilisation.
Bien que des niveaux élevés de RF peuvent avoir des effets nocifs sur la santé (en faisant augmenter la température des tissus),
l’exposition à de bas niveaux de RF n’entraînant aucun effet thermique ne pose aucun risque connu à la santé. Les nombreuses
études portant sur les expositions RF de faible intensité n’ont décelé aucun effet biologique. Certaines études ont suggéré l’existence
de certains effets biologiques, mais leurs conclusions n’ont pas été corroborées.
L’adaptateur de réseau local sans fil (DY-WL10) est conforme aux limites d’exposition aux radiofréquences FCC/IC établies pour un
environnement non contrôlé et satisfait aux exigences de conformité pour l’exposition aux radiofréquences (RF) de la FCC,
Supplément C à OET65 et RSS-102 des exigences d’exposition aux RF de l’IC.
Cet appareil est conforme à la section 15 de la réglementation de la FCC et à la section RSS-Gen de la réglementation IC. Son
utilisation est soumise aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférence et (2) cet appareil doit
tolérer les différentes interférences reçues, y compris les interférences susceptibles de provoquer un dysfonctionnement.
Cet émetteur ne doit pas être placé à proximité d’une autre antenne ou d’un autre émetteur, ni être utilisé de pair avec de tels autres
appareils.
Ce produit est strictement destiné à un usage en intérieur en raison de son fonctionnement dans la bande de fréquence 5,15 à 5,25
GHz. La FCC et IC exigent que cet appareil soit utilisé en intérieur pour la plage de fréquence entre 5,15 et 5,25 GHz afin de réduire
les éventuelles interférences nuisibles au canal commun des systèmes de service mobile par satellite. Des radars haute puissance
sont désignés utilisateurs primaires des bandes 5,25 à 5,35 GHz et 5,65 à 5,85 GHz. Ces stations radars peuvent causer des
interférences et(ou) endommager l’appareil.
Les connaissances scientifiques disponibles ne font état d’aucun problème de santé associé à l’utilisation d’appareils sans fil à faible
puissance. Par contre, il n’existe aucune preuve que ces appareils ne posent absolument aucun risque pour la santé. Les appareils
sans fil de faible puissance émettent de bas niveaux d’énergie radiofréquence (RF) dans la plage des micro-ondes pendant leur
utilisation.
Bien que des niveaux élevés de RF peuvent avoir des effets nocifs sur la santé (en faisant augmenter la température des tissus),
l’exposition à de bas niveaux de RF n’entraînant aucun effet thermique ne pose aucun risque connu à la santé. Les nombreuses
études portant sur les expositions RF de faible intensité n’ont décelé aucun effet biologique. Certaines études ont suggéré l’existence
de certains effets biologiques, mais leurs conclusions n’ont pas été corroborées.
L’adaptateur de réseau local sans fil (DY-WL10) est conforme aux limites d’exposition aux radiofréquences FCC/IC établies pour un
environnement non contrôlé et satisfait aux exigences de conformité pour l’exposition aux radiofréquences (RF) de la FCC,
Supplément C à OET65 et RSS-102 des exigences d’exposition aux RF de l’IC.
CE QUI SUIT NE S’APPLIQUE QU’AU CANADA.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
La plaque signalétique se trouve sur le dessous de l’appareil.
Lorsque cet adaptateur n’est pas reconnu
Précautions
* Un identifiant de réseau sans fil (Service Set IDentification - SSID ) est un nom utilisé par un
réseau local sans fil pour identifier un réseau donné. La transmission est possible lorsque le
SSID des deux appareils est le même.
SSID des deux appareils est le même.
Il est interdit d’exporter un adaptateur de réseau local sans fil ou d’en apporter dans les pays* sur
lesquels les États-Unis ont imposé un embargo. Aux États-Unis, l’adaptateur de réseau local sans fil
est assujetti aux réglements de Export Administration Regulations (EAR) en raison de l’installation
d’un dispositif de chiffrement fabriqué aux États-Unis (en vigueur depuis novembre 2009)
* Cuba, Iran, Syrie, Corée du Nord, Soudan, etc.
lesquels les États-Unis ont imposé un embargo. Aux États-Unis, l’adaptateur de réseau local sans fil
est assujetti aux réglements de Export Administration Regulations (EAR) en raison de l’installation
d’un dispositif de chiffrement fabriqué aux États-Unis (en vigueur depuis novembre 2009)
* Cuba, Iran, Syrie, Corée du Nord, Soudan, etc.
until
2010/1/12
DY-WL10_mst.fm 1 ページ 2010年1月14日 木曜日 午後8時16分