Furuno USA Inc 9ZWFA170 Manual Do Utilizador

2.  INLAND AIS OPERATION

12. Select [BLUE CONES], then press the ENT/ACK key. The pop up window shown 

below appears.

Depending on the cargo, up to four “cones” have to be shown on the mast, in day-
light with cones and nighttime with blue lights. The greater the number of the 
cones the more hazardous the cargo.
•  Select [NO. OF CONES 0] if your ship is not carrying hazardous cargo. 
•  Select [B-FLAG] if your ship carries explosives or hazardous cargo that ex-

ceeds the hazard level expressed with cones. 

•  Select [UNKNOWN] if you are unsure of cargo type.

13. Set [BLUE CONES] as necessary, then press the ENT/ACK key.
14. Select [UN/LOADED], then press the ENT/ACK key. The 

pop up window shown to the right appears.

15. Select [LOADED] for vessel loaded with cargo, [UNLOAD-

ED] for vessel with no cargo, or [- - -] if you are unsure of the 
loading status.

16. Select [CREW] is now selected, then press the ENT/ACK key.
17. Enter number of crew (0-254) then press the ENT/ACK key.
18. Select [PASSENGER], then press the ENT/ACK key.
19. Enter number of passengers (0-8190) then press the ENT/ACK key.
20. Select [PERSONNEL], then press the ENT/ACK key.
21. Enter number of shipboard personnel (persons other than passengers and crew, 

0-254) then press the ENT/ACK key.
Note: Crew, passenger and shipboard personnel are sent in RFM55 messages.

22. [NO. OF PERSONS] is selected; press the ENT/ACK key.
23. Enter the total number of persons (sum of crew, passengers and shipboard per-

sonnel) on-board then press the ENT/ACK key.
Note: If the value entered for [CREW], [PASSENGER], [PERSONNEL] or [NO. 
OF PERSONS] exceeds the maximum setting listed in the steps above, the value 
appears as maximum for that item.