Furuno USA Inc 9ZWWR2100 Manual Do Utilizador
SSE-14-0023_2
9-1
9. PC operation
9.1. File
1) File Play: To play a regular echo recorded file (idx)
(Refer “2) Acquisition” on 9.3.1.)
2) Snapshot: To indicate captured radar screen (jpg).
3) Exit: To exit the software of RainMap.
4) Operation mode: (Click “File” + [Ctrl] + [Alt] at
same time to Indicate the menu)
Do this operation mode after changed some
parameters to operate a radar.
- Observation:
parameters to operate a radar.
- Observation:
Select the entered values at “Setting” menu
with regular mode.
with regular mode.
- Verify operation during installation:
Change some parameters automatically to
verify operation during installation.
All parameters will set back to previous
setting (before this verify operation) if go
back to “Observation”
verify operation during installation.
All parameters will set back to previous
setting (before this verify operation) if go
back to “Observation”
9.2. Disp
1) DispSelect
- 2D: Indicate the echo by 2 dimension.
- 3D: Indicate the echo by 3 dimension.
2) Sub echo:
To show another screen to indicate
the echo
3) Information Indication:
*Under construction.
9.3. Setting
9.3.1. Setting
1) View
Range [km]
To setup an indication range.
To setup an indication range.
♦ Confirm and setup the value before shipping.
DataType
To select an indication of the radar parameter.
・ Rainfall intensity: Intensity of rainfall [mm/h]
・ Reflective intensity (H): Reflection factor of
the horizontal polarimetric radar [dBz]
・ Reflective intensity (V): Reflection factor of the vertical polarimetric radar [dBz]
・ Doppler speed: Doppler speed [m/s]
・ Zdr [dB]: Radar reflection factor difference.
・ Kdp [deg/km]: Propagation phase difference rate of change.
・ Doppler speed: Doppler speed [m/s]
・ Zdr [dB]: Radar reflection factor difference.
・ Kdp [deg/km]: Propagation phase difference rate of change.